diff options
Diffstat (limited to 'epan/dissectors/errno.c')
| -rw-r--r-- | epan/dissectors/errno.c | 182 |
1 files changed, 182 insertions, 0 deletions
diff --git a/epan/dissectors/errno.c b/epan/dissectors/errno.c new file mode 100644 index 0000000000..ca40cd3d47 --- /dev/null +++ b/epan/dissectors/errno.c @@ -0,0 +1,182 @@ +/* errno.c + * String descriptions for errno values. + * + * Wireshark - Network traffic analyzer + * By Gerald Combs <gerald@wireshark.org> + * Copyright 1998 Gerald Combs + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include "config.h" + +#include <epan/value_string.h> + +/* Note: sorted in (unsigned) ascending order with no gaps to enable direct, + * array-indexed access. */ +static const value_string linux_negative_errno_vals[] = { + /* from include/uapi/asm-generic/errno.h */ + { -133, "Memory page has hardware error (-EHWPOISON)" }, + { -132, "Operation not possible due to RF-kill (-ERFKILL)" }, + { -131, "State not recoverable (-ENOTRECOVERABLE)" }, + { -130, "Owner died (-EOWNERDEAD)" }, + { -129, "Key was rejected by service (-EKEYREJECTED)" }, + { -128, "Key has been revoked (-EKEYREVOKED)" }, + { -127, "Key has expired (-EKEYEXPIRED)" }, + { -126, "Required key not available (-ENOKEY)" }, + { -125, "Operation Canceled (-ECANCELED)" }, + { -124, "Wrong medium type (-EMEDIUMTYPE)" }, + { -123, "No medium found (-ENOMEDIUM)" }, + { -122, "Quota exceeded (-EDQUOT)" }, + { -121, "Remote I/O error (-EREMOTEIO)" }, + { -120, "Is a named type file (-EISNAM)" }, + { -119, "No XENIX semaphores available (-ENAVAIL)" }, + { -118, "Not a XENIX named type file (-ENOTNAM)" }, + { -117, "Structure needs cleaning (-EUCLEAN)" }, + { -116, "Stale file handle (-ESTALE)" }, + { -115, "Operation now in progress (-EINPROGRESS)" }, + { -114, "Operation already in progress (-EALREADY)" }, + { -113, "No route to host (-EHOSTUNREACH)" }, + { -112, "Host is down (-EHOSTDOWN)" }, + { -111, "Connection refused (-ECONNREFUSED)" }, + { -110, "Connection timed out (-ETIMEDOUT)" }, + { -109, "Too many references: cannot splice (-ETOOMANYREFS)" }, + { -108, "Cannot send after transport endpoint shutdown (-ESHUTDOWN)" }, + { -107, "Transport endpoint is not connected (-ENOTCONN)" }, + { -106, "Transport endpoint is already connected (-EISCONN)" }, + { -105, "No buffer space available (-ENOBUFS)" }, + { -104, "Connection reset by peer (-ECONNRESET)" }, + { -103, "Software caused connection abort (-ECONNABORTED)" }, + { -102, "Network dropped connection because of reset (-ENETRESET)" }, + { -101, "Network is unreachable (-ENETUNREACH)" }, + { -100, "Network is down (-ENETDOWN)" }, + { -99, "Cannot assign requested address (-EADDRNOTAVAIL)" }, + { -98, "Address already in use (-EADDRINUSE)" }, + { -97, "Address family not supported by protocol (-EAFNOSUPPORT)" }, + { -96, "Protocol family not supported (-EPFNOSUPPORT)" }, + { -95, "Operation not supported on transport endpoint (-EOPNOTSUPP)" }, + { -94, "Socket type not supported (-ESOCKTNOSUPPORT)" }, + { -93, "Protocol not supported (-EPROTONOSUPPORT)" }, + { -92, "Protocol not available (-ENOPROTOOPT)" }, + { -91, "Protocol wrong type for socket (-EPROTOTYPE)" }, + { -90, "Message too long (-EMSGSIZE)" }, + { -89, "Destination address required (-EDESTADDRREQ)" }, + { -88, "Socket operation on non-socket (-ENOTSOCK)" }, + { -87, "Too many users (-EUSERS)" }, + { -86, "Streams pipe error (-ESTRPIPE)" }, + { -85, "Interrupted system call should be restarted (-ERESTART)" }, + { -84, "Illegal byte sequence (-EILSEQ)" }, + { -83, "Cannot exec a shared library directly (-ELIBEXEC)" }, + { -82, "Attempting to link in too many shared libraries (-ELIBMAX)" }, + { -81, ".lib section in a.out corrupted (-ELIBSCN)" }, + { -80, "Accessing a corrupted shared library (-ELIBBAD)" }, + { -79, "Can not access a needed shared library (-ELIBACC)" }, + { -78, "Remote address changed (-EREMCHG)" }, + { -77, "File descriptor in bad state (-EBADFD)" }, + { -76, "Name not unique on network (-ENOTUNIQ)" }, + { -75, "Value too large for defined data type (-EOVERFLOW)" }, + { -74, "Not a data message (-EBADMSG)" }, + { -73, "RFS specific error (-EDOTDOT)" }, + { -72, "Multihop attempted (-EMULTIHOP)" }, + { -71, "Protocol error (-EPROTO)" }, + { -70, "Communication error on send (-ECOMM)" }, + { -69, "Srmount error (-ESRMNT)" }, + { -68, "Advertise error (-EADV)" }, + { -67, "Link has been severed (-ENOLINK)" }, + { -66, "Object is remote (-EREMOTE)" }, + { -65, "Package not installed (-ENOPKG)" }, + { -64, "Machine is not on the network (-ENONET)" }, + { -63, "Out of streams resources (-ENOSR)" }, + { -62, "Timer expired (-ETIME)" }, + { -61, "No data available (-ENODATA)" }, + { -60, "Device not a stream (-ENOSTR)" }, + { -59, "Bad font file format (-EBFONT)" }, + { -58, "(-58 \?\?\?)" }, /* dummy so that there are no "gaps" */ + { -57, "Invalid slot (-EBADSLT)" }, + { -56, "Invalid request code (-EBADRQC)" }, + { -55, "No anode (-ENOANO)" }, + { -54, "Exchange full (-EXFULL)" }, + { -53, "Invalid request descriptor (-EBADR)" }, + { -52, "Invalid exchange (-EBADE)" }, + { -51, "Level 2 halted (-EL2HLT)" }, + { -50, "No CSI structure available (-ENOCSI)" }, + { -49, "Protocol driver not attached (-EUNATCH)" }, + { -48, "Link number out of range (-ELNRNG)" }, + { -47, "Level 3 reset (-EL3RST)" }, + { -46, "Level 3 halted (-EL3HLT)" }, + { -45, "Level 2 not synchronized (-EL2NSYNC)" }, + { -44, "Channel number out of range (-ECHRNG)" }, + { -43, "Identifier removed (-EIDRM)" }, + { -42, "No message of desired type (-ENOMSG)" }, + { -41, "(-41 \?\?\?)" }, /* dummy so that there are no "gaps" */ + { -40, "Too many symbolic links encountered (-ELOOP)" }, + { -39, "Directory not empty (-ENOTEMPTY)" }, + { -38, "Invalid system call number (-ENOSYS)" }, + { -37, "No record locks available (-ENOLCK)" }, + { -36, "File name too long (-ENAMETOOLONG)" }, + { -35, "Resource deadlock would occur (-EDEADLK)" }, + /* from include/uapi/asm-generic/errno-base.h */ + { -34, "Math result not representable (-ERANGE)" }, + { -33, "Math argument out of domain of func (-EDOM)" }, + { -32, "Broken pipe (-EPIPE)" }, + { -31, "Too many links (-EMLINK)" }, + { -30, "Read-only file system (-EROFS)" }, + { -29, "Illegal seek (-ESPIPE)" }, + { -28, "No space left on device (-ENOSPC)" }, + { -27, "File too large (-EFBIG)" }, + { -26, "Text file busy (-ETXTBSY)" }, + { -25, "Not a typewriter (-ENOTTY)" }, + { -24, "Too many open files (-EMFILE)" }, + { -23, "File table overflow (-ENFILE)" }, + { -22, "Invalid argument (-EINVAL)" }, + { -21, "Is a directory (-EISDIR)" }, + { -20, "Not a directory (-ENOTDIR)" }, + { -19, "No such device (-ENODEV)" }, + { -18, "Cross-device link (-EXDEV)" }, + { -17, "File exists (-EEXIST)" }, + { -16, "Device or resource busy (-EBUSY)" }, + { -15, "Block device required (-ENOTBLK)" }, + { -14, "Bad address (-EFAULT)" }, + { -13, "Permission denied (-EACCES)" }, + { -12, "Out of memory (-ENOMEM)" }, + { -11, "Try again (-EAGAIN)" }, + { -10, "No child processes (-ECHILD)" }, + { -9, "Bad file number (-EBADF)" }, + { -8, "Exec format error (-ENOEXEC)" }, + { -7, "Argument list too long (-E2BIG)" }, + { -6, "No such device or address (-ENXIO)" }, + { -5, "I/O error (-EIO)" }, + { -4, "Interrupted system call (-EINTR)" }, + { -3, "No such process (-ESRCH)" }, + { -2, "No such file or directory (-ENOENT)" }, + { -1, "Operation not permitted (-EPERM)" }, + { 0, "Success" }, + { 0, NULL } +}; + +value_string_ext linux_negative_errno_vals_ext = VALUE_STRING_EXT_INIT(linux_negative_errno_vals); + +/* + * Editor modelines - http://www.wireshark.org/tools/modelines.html + * + * Local variables: + * c-basic-offset: 4 + * tab-width: 8 + * indent-tabs-mode: nil + * End: + * + * vi: set shiftwidth=4 tabstop=8 expandtab: + * :indentSize=4:tabSize=8:noTabs=true: + */ |