From 9b937a183aa31e7690e3b1b88683240356c07de9 Mon Sep 17 00:00:00 2001 From: Guy Harris Date: Tue, 1 Feb 2000 21:52:22 +0000 Subject: Add a note about many Linux libpcaps turning promiscuous mode off only when the program using libpcap exits, and perhaps not doing so even then, and indicating how to check whether an interface is in promiscuous mode and how to take it out of promiscuous mode if it is in promiscuous mode. svn path=/trunk/; revision=1593 --- README.linux | 30 +++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) (limited to 'README.linux') diff --git a/README.linux b/README.linux index e754b733f6..ea6d1255ce 100644 --- a/README.linux +++ b/README.linux @@ -1,4 +1,4 @@ -$Id: README.linux,v 1.4 2000/02/01 21:21:47 guy Exp $ +$Id: README.linux,v 1.5 2000/02/01 21:52:22 guy Exp $ The standard libpcap compiled for Linux has a timeout problem; it doesn't support the timeout argument to "pcap_open_live()". @@ -19,3 +19,31 @@ you're capturing on a Linux loopback device, do not use a capture filter, as it will probably reject most if not all packets, including the packets it's intended to accept - instead, capture all packets and use a display filter to select the packets you want to see. + +In addition, current versions of libpcap on at least some Linux +distributions will not turn promiscuous mode off on a network device +until the program using promiscuous mode exits, so if you start a +capture with Ethereal on some Linux distributions, the network interface +will be put in promiscuous mode and will remain in promiscuous mode +until Ethereal exits. There might be additional libpcap bugs that cause +it not to be turned off even when Ethereal exits; if your network is +busy, this could cause the Linux networking stack to do a lot more work +discarding packets not intended for the machine, so you may want to +check, after running Ethereal, whether any network interfaces are in +promiscuous mode (the output of "ifconfig -a" will say something such as + +eth0 Link encap:Ethernet HWaddr 00:00:66:66:66:66 + inet addr:66.66.66.66 Bcast:66.66.66.255 Mask:255.255.255.0 + UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 + RX packets:6493 errors:0 dropped:0 overruns:0 frame:0 + TX packets:3380 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:100 + Interrupt:18 Base address:0xfc80 + +with "PROMISC" indicating that the interface is in promiscuous mode), +and, if any interfaces are in promiscuous mode and no capture is being +done on that interface, turn promiscuous mode off by hand with + + ifconfig -promisc + +where "" is the name of the interface. -- cgit v1.2.1