vfio/pci: Intel graphics legacy mode assignment

Enable quirks to support SandyBridge and newer IGD devices as primary
VM graphics.  This requires new vfio-pci device specific regions added
in kernel v4.6 to expose the IGD OpRegion, the shadow ROM, and config
space access to the PCI host bridge and LPC/ISA bridge.  VM firmware
support, SeaBIOS only so far, is also required for reserving memory
regions for IGD specific use.  In order to enable this mode, IGD must
be assigned to the VM at PCI bus address 00:02.0, it must have a ROM,
it must be able to enable VGA, it must have or be able to create on
its own an LPC/ISA bridge of the proper type at PCI bus address
00:1f.0 (sorry, not compatible with Q35 yet), and it must have the
above noted vfio-pci kernel features and BIOS.  The intention is that
to enable this mode, a user simply needs to assign 00:02.0 from the
host to 00:02.0 in the VM:

  -device vfio-pci,host=0000:00:02.0,bus=pci.0,addr=02.0

and everything either happens automatically or it doesn't.  In the
case that it doesn't, we leave error reports, but assume the device
will operate in universal passthrough mode (UPT), which doesn't
require any of this, but has a much more narrow window of supported
devices, supported use cases, and supported guest drivers.

When using IGD in this mode, the VM firmware is required to reserve
some VM RAM for the OpRegion (on the order or several 4k pages) and
stolen memory for the GTT (up to 8MB for the latest GPUs).  An
additional option, x-igd-gms allows the user to specify some amount
of additional memory (value is number of 32MB chunks up to 512MB) that
is pre-allocated for graphics use.  TBH, I don't know of anything that
requires this or makes use of this memory, which is why we don't
allocate any by default, but the specification suggests this is not
actually a valid combination, so the option exists as a workaround.
Please report if it's actually necessary in some environment.

See code comments for further discussion about the actual operation
of the quirks necessary to assign these devices.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>

1 files changed, 2 insertions, 0 deletions

diff --git a/hw/vfio/pci.h b/hw/vfio/pci.h
index 3976f68549..31ee8da4de 100644
--- a/hw/vfio/pci.h
+++ b/hw/vfio/pci.h
@@ -115,6 +115,7 @@ typedef struct VFIOPCIDevice {
     int interrupt; /* Current interrupt type */
     VFIOBAR bars[PCI_NUM_REGIONS - 1]; /* No ROM */
     VFIOVGA *vga; /* 0xa0000, 0x3b0, 0x3c0 */
+    void *igd_opregion;
     PCIHostDeviceAddress host;
     EventNotifier err_notifier;
     EventNotifier req_notifier;
@@ -129,6 +130,7 @@ typedef struct VFIOPCIDevice {
 #define VFIO_FEATURE_ENABLE_REQ_BIT 1
 #define VFIO_FEATURE_ENABLE_REQ (1 << VFIO_FEATURE_ENABLE_REQ_BIT)
     int32_t bootindex;
+    uint32_t igd_gms;
     uint8_t pm_cap;
     bool has_vga;
     bool pci_aer;