target-arm: Add AArch32 banked register access to secure physical timer

If EL3 is AArch32, then the secure physical timer is accessed via
banking of the registers used for the non-secure physical timer.
Implement this banking.

Note that the access controls for the AArch32 banked registers
remain the same as the physical-timer checks; they are not the
same as the controls on the AArch64 secure timer registers.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1437047249-2357-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>

1 files changed, 27 insertions, 0 deletions

diff --git a/target-arm/helper.c b/target-arm/helper.c
index 7cf6ffd340..1568aa6617 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -1527,12 +1527,22 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
     },
     /* per-timer control */
     { .name = "CNTP_CTL", .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 1,
+      .secure = ARM_CP_SECSTATE_NS,
       .type = ARM_CP_IO | ARM_CP_ALIAS, .access = PL1_RW | PL0_R,
       .accessfn = gt_ptimer_access,
       .fieldoffset = offsetoflow32(CPUARMState,
                                    cp15.c14_timer[GTIMER_PHYS].ctl),
       .writefn = gt_phys_ctl_write, .raw_writefn = raw_write,
     },
+    { .name = "CNTP_CTL(S)",
+      .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 1,
+      .secure = ARM_CP_SECSTATE_S,
+      .type = ARM_CP_IO | ARM_CP_ALIAS, .access = PL1_RW | PL0_R,
+      .accessfn = gt_ptimer_access,
+      .fieldoffset = offsetoflow32(CPUARMState,
+                                   cp15.c14_timer[GTIMER_SEC].ctl),
+      .writefn = gt_sec_ctl_write, .raw_writefn = raw_write,
+    },
     { .name = "CNTP_CTL_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 2, .opc2 = 1,
       .type = ARM_CP_IO, .access = PL1_RW | PL0_R,
@@ -1558,10 +1568,18 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
     },
     /* TimerValue views: a 32 bit downcounting view of the underlying state */
     { .name = "CNTP_TVAL", .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 0,
+      .secure = ARM_CP_SECSTATE_NS,
       .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL1_RW | PL0_R,
       .accessfn = gt_ptimer_access,
       .readfn = gt_phys_tval_read, .writefn = gt_phys_tval_write,
     },
+    { .name = "CNTP_TVAL(S)",
+      .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 0,
+      .secure = ARM_CP_SECSTATE_S,
+      .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL1_RW | PL0_R,
+      .accessfn = gt_ptimer_access,
+      .readfn = gt_sec_tval_read, .writefn = gt_sec_tval_write,
+    },
     { .name = "CNTP_TVAL_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 2, .opc2 = 0,
       .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL1_RW | PL0_R,
@@ -1602,12 +1620,21 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
     },
     /* Comparison value, indicating when the timer goes off */
     { .name = "CNTP_CVAL", .cp = 15, .crm = 14, .opc1 = 2,
+      .secure = ARM_CP_SECSTATE_NS,
       .access = PL1_RW | PL0_R,
       .type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_ALIAS,
       .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].cval),
       .accessfn = gt_ptimer_access,
       .writefn = gt_phys_cval_write, .raw_writefn = raw_write,
     },
+    { .name = "CNTP_CVAL(S)", .cp = 15, .crm = 14, .opc1 = 2,
+      .secure = ARM_CP_SECSTATE_S,
+      .access = PL1_RW | PL0_R,
+      .type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_ALIAS,
+      .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_SEC].cval),
+      .accessfn = gt_ptimer_access,
+      .writefn = gt_sec_cval_write, .raw_writefn = raw_write,
+    },
     { .name = "CNTP_CVAL_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 2, .opc2 = 2,
       .access = PL1_RW | PL0_R,