summaryrefslogtreecommitdiff
path: root/block/vhdx-log.c
AgeCommit message (Collapse)AuthorFilesLines
2017-08-31vhdx: use QEMU_ALIGN_DOWNMarc-André Lureau1-1/+1
I used the clang-tidy qemu-round check to generate the fix: https://github.com/elmarco/clang-tools-extra Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-08-08block/vhdx: check error return of bdrv_truncate()Jeff Cody1-1/+5
Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-08-08block/vhdx: check error return of bdrv_flush()Jeff Cody1-3/+14
Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-08-08block/vhdx: check for offset overflow to bdrv_truncate()Jeff Cody1-1/+5
VHDX uses uint64_t types for most offsets, following the VHDX spec. However, bdrv_truncate() takes an int64_t value for the truncating offset. Check for overflow before calling bdrv_truncate(). While we are here, replace the bit shifting with QEMU_ALIGN_UP as well. N.B.: For a compliant image this is not an issue, as the maximum VHDX image size is defined per the spec to be 64TB. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-08-08block/vhdx: check error return of bdrv_getlength()Jeff Cody1-5/+18
Calls to bdrv_getlength() were not checking for error. In vhdx.c, this can lead to truncating an image file, so it is a definite bug. In vhdx-log.c, the path for improper behavior is less clear, but it is best to check in any case. Some minor code movement of the log_guid intialization, as well. Reported-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-11block: Add PreallocMode to bdrv_truncate()Max Reitz1-1/+1
For block drivers that just pass a truncate request to the underlying protocol, we can now pass the preallocation mode instead of aborting if it is not PREALLOC_MODE_OFF. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20170613202107.10125-3-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-04-28block: Add errp to b{lk,drv}_truncate()Max Reitz1-1/+1
For one thing, this allows us to drop the error message generation from qemu-img.c and blockdev.c and instead have it unified in bdrv_truncate(). Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20170328205129.15138-3-mreitz@redhat.com Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-02-24block: Pass BdrvChild to bdrv_truncate()Kevin Wolf1-1/+1
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-07-05block: Convert bdrv_pwrite(v/_sync) to BdrvChildKevin Wolf1-2/+2
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-05block: Convert bdrv_pread(v) to BdrvChildKevin Wolf1-4/+4
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-05-19qemu-common: stop including qemu/bswap.h from qemu-common.hPaolo Bonzini1-0/+1
Move it to the actual users. There are still a few includes of qemu/bswap.h in headers; removing them is left for future work. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster1-0/+1
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-20block: Clean up includesPeter Maydell1-0/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-01-13vhdx: Fix "log that needs to be replayed" error messageMarkus Armbruster1-6/+7
The arguments of error_setg_errno() should yield a short error string without newlines. Here, we try to append additional help to the error message by embedding newlines in the error string. That's nice, but it's doesn't play nicely with the errno part. tests/qemu-iotests/070.out shows the resulting mess: can't open device TEST_DIR/iotest-dirtylog-10G-4M.vhdx: VHDX image file 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx' opened read-only, but contains a log that needs to be replayed. To replay the log, execute: qemu-img check -r all 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx': Operation not permitted Switch to error_setg() and error_append_hint(). Result: can't open device TEST_DIR/iotest-dirtylog-10G-4M.vhdx: VHDX image file 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx' opened read-only, but contains a log that needs to be replayed To replay the log, run: qemu-img check -r all 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx' Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1450452927-8346-21-git-send-email-armbru@redhat.com>
2015-10-16block: Convert bs->file to BdrvChildKevin Wolf1-12/+13
This patch removes the temporary duplication between bs->file and bs->file_child by converting everything to BdrvChild. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-22qerror: Move #include out of qerror.hMarkus Armbruster1-0/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-08-20block: Drop some superfluous casts from void *Markus Armbruster1-1/+1
They clutter the code. Unfortunately, I can't figure out how to make Coccinelle drop all of them, so I have to settle for common special cases: @@ type T; T *pt; void *pv; @@ - pt = (T *)pv; + pt = pv; @@ type T; @@ - (T *) (\(g_malloc\|g_malloc0\|g_realloc\|g_new\|g_new0\|g_renew\| g_try_malloc\|g_try_malloc0\|g_try_realloc\| g_try_new\|g_try_new0\|g_try_renew\)(...)) Topped off with minor manual style cleanups. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-15vhdx: Handle failure for potentially large allocationsKevin Wolf1-1/+6
Some code in the block layer makes potentially huge allocations. Failure is not completely unexpected there, so avoid aborting qemu and handle out-of-memory situations gracefully. This patch addresses the allocations in the vhdx block driver. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-08-15block: VHDX endian fixesJeff Cody1-18/+25
This patch contains several changes for endian conversion fixes for VHDX, particularly for big-endian machines (multibyte values in VHDX are all on disk in LE format). Tests were done with existing qemu-iotests on an IBM POWER7 (8406-71Y). This includes sample images created by Hyper-V, both with dirty logs and without. In addition, VHDX image files created (and written to) on a BE machine were tested on a LE machine, and vice-versa. Reported-by: Markus Armburster <armbru@redhat.com> Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-15block: vhdx - add error checkJeff Cody1-0/+5
This add an error check for an invalid descriptor entry signature, when flushing the log descriptor entries. Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-25Fixed various typosDeepak Kathayat1-1/+1
Signed-off-by: Deepak Kathayat <deepak.mk17@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-01-31block/vhdx: Error checking fixesMarkus Armbruster1-2/+2
Errors are inadvertently ignored in a few places. Has always been broken. Spotted by Coverity. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-20block: vhdx - improve error message, and .bdrv_check implementationJeff Cody1-1/+12
If there is a dirty log file to be replayed in a VHDX image, it is replayed in .vhdx_open(). However, if the file is opened read-only, then a somewhat cryptic error message results. This adds a more helpful error message for the user. If an image file contains a log to be replayed, and is opened read-only, the user is instructed to run 'qemu-img check -r all' on the image file. Running qemu-img check -r all will cause the image file to be opened r/w, which will replay the log file. If a log file replay is detected, this is flagged, and bdrv_check will increase the corruptions_fixed count for the image. [Fixed typo in error message that was pointed out by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-07block: vhdx - add log write supportJeff Cody1-0/+282
This adds support for writing to the VHDX log. For spec details, see VHDX Specification Format v1.00: https://www.microsoft.com/en-us/download/details.aspx?id=34750 There are a few limitations to this log support: 1.) There is no caching yet 2.) The log is flushed after each entry The primary write interface, vhdx_log_write_and_flush(), performs a log write followed by an immediate flush of the log. As each log entry sector is a minimum of 4KB, partial sector writes are filled in with data from the disk write destination. If the current file log GUID is 0, a new GUID is generated and updated in the header. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-07block: vhdx - log parsing, replay, and flush supportJeff Cody1-0/+728
This adds support for VHDX v0 logs, as specified in Microsoft's VHDX Specification Format v1.00: https://www.microsoft.com/en-us/download/details.aspx?id=34750 The following support is added: * Log parsing, and validation - validate that an existing log is correct. * Log search - search through an existing log, to find any valid sequence of entries. * Log replay and flush - replay an existing log, and flush/clear the log when complete. The VHDX log is a circular buffer, with elements (sectors) of 4KB. A log entry is a variably-length number of sectors, that is comprised of a header and 'descriptors', that describe each sector. A log may contain multiple entries, know as a log sequence. In a log sequence, each log entry immediately follows the previous entry, with an incrementing sequence number. There can only ever be one active and valid sequence in the log. Each log entry must match the file log GUID in order to be valid (along with other criteria). Once we have flushed all valid log entries, we marked the file log GUID to be zero, which indicates a buffer with no valid entries. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-05-15 23:13:54 +0000