summaryrefslogtreecommitdiff
path: root/hw/xen
AgeCommit message (Collapse)AuthorFilesLines
2018-04-26xen: Expect xenstore write to fail when restrictedRoss Lagerwall1-1/+6
Saving the current state to xenstore may fail when running restricted (in particular, after a migration). Therefore, don't report the error or exit when running restricted. Toolstacks that want to allow running QEMU restricted should instead make use of QMP events to listen for state changes. CC: Ian Jackson <ian.jackson@eu.citrix.com> Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2018-04-26xen: defer call to xen_restrict until just before os_setup_postIan Jackson1-0/+14
We need to restrict *all* the control fds that qemu opens. Looking in /proc/PID/fd shows there are many; their allocation seems scattered throughout Xen support code in qemu. We must postpone the restrict call until roughly the same time as qemu changes its uid, chroots (if applicable), and so on. There doesn't seem to be an appropriate hook already. The RunState change hook fires at different times depending on exactly what mode qemu is operating in. And it appears that no-one but the Xen code wants a hook at this phase of execution. So, introduce a bare call to a new function xen_setup_post, just before os_setup_post. Also provide the appropriate stub for when Xen compilation is disabled. We do the restriction before rather than after os_setup_post, because xen_restrict may need to open /dev/null, and os_setup_post might have called chroot. Currently this does not work with migration, because when running as the Xen device model qemu needs to signal to the toolstack that it is ready. It currently does this using xenstore, and for incoming migration (but not for ordinary startup) that happens after os_setup_post. It is correct that this happens late: we want the incoming migration stream to be processed by a restricted qemu. The fix for this will be to do the startup notification a different way, without using xenstore. (QMP is probably a reasonable choice.) So for now this restriction feature cannot be used in conjunction with migration. (Note that this is not a regression in this patch, because previously the -xen-restrict-domid call was, in fact, simply ineffective!) We will revisit this in the Xen 4.11 release cycle. Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com> CC: Paolo Bonzini <pbonzini@redhat.com> (maintainer:X86) CC: Richard Henderson <rth@twiddle.net> (maintainer:X86) CC: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86) CC: Michael S. Tsirkin <mst@redhat.com> (supporter:PC) Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2018-02-13Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-1/+8
virtio,vhost,pci,pc: features, fixes and cleanups - new stats in virtio balloon - virtio eventfd rework for boot speedup - vhost memory rework for boot speedup - fixes and cleanups all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 13 Feb 2018 16:29:55 GMT # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (22 commits) virtio-balloon: include statistics of disk/file caches acpi-test: update FADT lpc: drop pcie host dependency tests: acpi: fix FADT not being compared to reference table hw/pci-bridge: fix pcie root port's IO hints capability libvhost-user: Support across-memory-boundary access libvhost-user: Fix resource leak virtio-balloon: unref the memory region before continuing pci: removed the is_express field since a uniform interface was inserted virtio-blk: enable multiple vectors when using multiple I/O queues pci/bus: let it has higher migration priority pci-bridge/i82801b11: clear bridge registers on platform reset vhost: Move log_dirty check vhost: Merge and delete unused callbacks vhost: Clean out old vhost_set_memory and friends vhost: Regenerate region list from changed sections list vhost: Merge sections added to temporary list vhost: Simplify ring verification checks vhost: Build temporary section list and deref after commit virtio: improve virtio devices initialization time ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-09Move include qemu/option.h from qemu-common.h to actual usersMarkus Armbruster1-0/+1
qemu-common.h includes qemu/option.h, but most places that include the former don't actually need the latter. Drop the include, and add it to the places that actually need it. While there, drop superfluous includes of both headers, and separate #include from file comment with a blank line. This cleanup makes the number of objects depending on qemu/option.h drop from 4545 (out of 4743) to 284 in my "build everything" tree. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-20-armbru@redhat.com> [Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2018-02-09Include qmp-commands.h exactly where neededMarkus Armbruster1-1/+0
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-7-armbru@redhat.com> [OSX breakage fixed]
2018-02-08pci: removed the is_express field since a uniform interface was insertedYoni Bettan1-1/+8
according to Eduardo Habkost's commit fd3b02c889 all PCIEs now implement INTERFACE_PCIE_DEVICE so we don't need is_express field anymore. Devices that implements only INTERFACE_PCIE_DEVICE (is_express == 1) or devices that implements only INTERFACE_CONVENTIONAL_PCI_DEVICE (is_express == 0) where not affected by the change. The only devices that were affected are those that are hybrid and also had (is_express == 1) - therefor only: - hw/vfio/pci.c - hw/usb/hcd-xhci.c - hw/xen/xen_pt.c For those 3 I made sure that QEMU_PCI_CAP_EXPRESS is on in instance_init() Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Yoni Bettan <ybettan@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-06hw/xen*: Replace fprintf(stderr, "*\n" with error_report()Alistair Francis1-2/+3
Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines where then manually tweaked to pass checkpatch. xen_pt_log() was left with an fprintf(stderr, Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Anthony Perard <anthony.perard@citrix.com> Conversions that aren't followed by exit() dropped, because they might be inappropriate. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-13-armbru@redhat.com>
2018-01-19xen: Add only xen-sysdev to dynamic sysbus device listEduardo Habkost1-6/+1
There's no need to make the machine allow every possible sysbus device. We can now just add xen-sysdev to the allowed list. Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: xen-devel@lists.xenproject.org Cc: Juergen Gross <jgross@suse.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20171125151610.20547-6-ehabkost@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-01-19machine: Replace has_dynamic_sysbus with list of allowed devicesEduardo Habkost1-1/+6
The existing has_dynamic_sysbus flag makes the machine accept every user-creatable sysbus device type on the command-line. Replace it with a list of allowed device types, so machines can easily accept some sysbus devices while rejecting others. To keep exactly the same behavior as before, the existing has_dynamic_sysbus=true assignments are replaced with a TYPE_SYS_BUS_DEVICE entry on the allowed list. Other patches will replace the TYPE_SYS_BUS_DEVICE entries with more specific lists of devices. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Alexander Graf <agraf@suse.de> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: qemu-arm@nongnu.org Cc: qemu-ppc@nongnu.org Cc: xen-devel@lists.xenproject.org Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20171125151610.20547-2-ehabkost@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-01-11Merge remote-tracking branch 'origin/master' into HEADMichael S. Tsirkin1-0/+1
Resolve conflicts around apb. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-14xen/pt: Set is_express to avoid out-of-bounds writeSimon Gaiser1-0/+1
The passed-through device might be an express device. In this case the old code allocated a too small emulated config space in pci_config_alloc() since pci_config_size() returned the size for a non-express device. This leads to an out-of-bound write in xen_pt_config_reg_init(), which sometimes results in crashes. So set is_express as already done for KVM in vfio-pci. Shortened ASan report: ==17512==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x611000041648 at pc 0x55e0fdac51ff bp 0x7ffe4af07410 sp 0x7ffe4af07408 WRITE of size 2 at 0x611000041648 thread T0 #0 0x55e0fdac51fe in memcpy /usr/include/x86_64-linux-gnu/bits/string3.h:53 #1 0x55e0fdac51fe in stw_he_p include/qemu/bswap.h:330 #2 0x55e0fdac51fe in stw_le_p include/qemu/bswap.h:379 #3 0x55e0fdac51fe in pci_set_word include/hw/pci/pci.h:490 #4 0x55e0fdac51fe in xen_pt_config_reg_init hw/xen/xen_pt_config_init.c:1991 #5 0x55e0fdac51fe in xen_pt_config_init hw/xen/xen_pt_config_init.c:2067 #6 0x55e0fdabcf4d in xen_pt_realize hw/xen/xen_pt.c:830 #7 0x55e0fdf59666 in pci_qdev_realize hw/pci/pci.c:2034 #8 0x55e0fdda7d3d in device_set_realized hw/core/qdev.c:914 [...] 0x611000041648 is located 8 bytes to the right of 256-byte region [0x611000041540,0x611000041640) allocated by thread T0 here: #0 0x7ff596a94bb8 in __interceptor_calloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xd9bb8) #1 0x7ff57da66580 in g_malloc0 (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x50580) #2 0x55e0fdda7d3d in device_set_realized hw/core/qdev.c:914 [...] Signed-off-by: Simon Gaiser <hw42@ipsumj.de> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2017-12-05pci: Eliminate redundant PCIDevice::bus pointerDavid Gibson1-2/+2
The bus pointer in PCIDevice is basically redundant with QOM information. It's always initialized to the qdev_get_parent_bus(), the only difference is the type. Therefore this patch eliminates the field, instead creating a pci_get_bus() helper to do the type mangling to derive it conveniently from the QOM Device object underneath. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-12-05pci: Add pci_dev_bus_num() helperDavid Gibson1-3/+3
A fair proportion of the users of pci_bus_num() want to get the bus number on a specific device, so first have to look up the bus from the device then call it. This adds a helper to do that (since we're going to make looking up the bus slightly more verbose). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-11-05pci-assign: RemovePaolo Bonzini2-0/+89
Legacy PCI device assignment has been removed from Linux in 4.12, and had been deprecated 2 years ago there. We can remove it from QEMU as well. The ROM loading code was shared with Xen PCI passthrough, so move it to hw/xen. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-10-26xen: add a global indicator for grant copy being availableJuergen Gross1-0/+11
The Xen qdisk backend needs to test whether grant copy operations is available in the kernel. Unfortunately this collides with using xengnttab_set_max_grants() on some kernels as this operation has to be the first one after opening the gnttab device. In order to solve this problem test for the availability of grant copy in xen_be_init() opening the gnttab device just for that purpose and closing it again afterwards. Advertise the availability via a global flag and use that flag in the qdisk backend. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2017-10-15xen/pt: Mark TYPE_XEN_PT_DEVICE as hybridEduardo Habkost1-0/+1
xen-pt doesn't set the is_express field, but is supposed to be able to handle PCI Express devices too. Mark it as hybrid. Suggested-by: Jan Beulich <JBeulich@suse.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devicesEduardo Habkost1-0/+4
Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of TYPE_PCI_DEVICE, except: 1) The ones that already have INTERFACE_PCIE_DEVICE set: * base-xhci * e1000e * nvme * pvscsi * vfio-pci * virtio-pci * vmxnet3 2) base-pci-bridge Not all PCI bridges are Conventional PCI devices, so INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes that are actually Conventional PCI: * dec-21154-p2p-bridge * i82801b11-bridge * pbm-bridge * pci-bridge The direct subtypes of base-pci-bridge not touched by this patch are: * xilinx-pcie-root: Already marked as PCIe-only. * pcie-pci-bridge: Already marked as PCIe-only. * pcie-port: all non-abstract subtypes of pcie-port are already marked as PCIe-only devices. 3) megasas-base Not all megasas devices are Conventional PCI devices, so the interface names are added to the subclasses registered by megasas_register_types(), according to information in the megasas_devices[] array. "megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas". Acked-by: Alberto Garcia <berto@igalia.com> Acked-by: John Snow <jsnow@redhat.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-20xen/pt: allow QEMU to request MSI unmasking at bind timeRoger Pau Monne3-5/+29
When a MSI interrupt is bound to a guest using xc_domain_update_msi_irq (XEN_DOMCTL_bind_pt_irq) the interrupt is left masked by default. This causes problems with guests that first configure interrupts and clean the per-entry MSIX table mask bit and afterwards enable MSIX globally. In such scenario the Xen internal msixtbl handlers would not detect the unmasking of MSIX entries because vectors are not yet registered since MSIX is not enabled, and vectors would be left masked. Introduce a new flag in the gflags field to signal Xen whether a MSI interrupt should be unmasked after being bound. This also requires to track the mask register for MSI interrupts, so QEMU can also notify to Xen whether the MSI interrupt should be bound masked or unmasked Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Reported-by: Andreas Kinzler <hfp@posteo.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2017-08-01trace-events: fix code style: %# -> 0x%Vladimir Sementsov-Ogievskiy1-4/+4
In trace format '#' flag of printf is forbidden. Fix it to '0x%'. This patch is created by the following: check that we have a problem > find . -name trace-events | xargs grep '%#' | wc -l 56 check that there are no cases with additional printf flags before '#' > find . -name trace-events | xargs grep "%[-+ 0'I]+#" | wc -l 0 check that there are no wrong usage of '#' and '0x' together > find . -name trace-events | xargs grep '0x%#' | wc -l 0 fix the problem > find . -name trace-events | xargs sed -i 's/%#/0x%/g' [Eric Blake noted that xargs grep '%[-+ 0'I]+#' should be xargs grep "%[-+ 0'I]+#" instead so the shell quoting is correct. --Stefan] Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20170731160135.12101-3-vsementsov@virtuozzo.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-07-31docs: fix broken paths to docs/devel/tracing.txtPhilippe Mathieu-Daudé1-1/+1
With the move of some docs/ to docs/devel/ on ac06724a71, no references were updated. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-07-18xen_pt_msi.c: Check for xen_host_pci_get_* failures in xen_pt_msix_init()Peter Maydell1-2/+10
Check the return status of the xen_host_pci_get_* functions we call in xen_pt_msix_init(), and fail device init if the reads failed rather than ploughing ahead. (Spotted by Coverity: CID 777338.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2017-07-18hw/xen: Set emu_mask for igd_opregion registerXiong Zhang1-0/+1
In igd passthrough environment, guest could only access opregion at the first bootup time. Once guest shutdown, later guest couldn't access opregion anymore. This is because qemu set emulated guest opregion base address to host register. Later guest get a wrong host opregion base address, and couldn't access it anymore. This patch set emu_mask for igd_opregion register, so guest won't set guest opregion base address to host. Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2017-07-07xen/pt: Fixup addr validation in xen_pt_pci_config_access_checkAnoob Soman1-1/+1
xen_pt_pci_config_access_check checks if addr >= 0xFF. 0xFF is a valid address and should not be ignored. Signed-off-by: Anoob Soman <anoob.soman@citrix.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2017-06-28migration: move skip_section_footersPeter Xu1-3/+5
Move it into MigrationState, revert its meaning and renaming it to send_section_footer, with a property bound to it. Same trick is played like previous patches. Removing savevm_skip_section_footers(). Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1498536619-14548-9-git-send-email-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-06-28migration: move skip_configuration outPeter Xu1-1/+5
It was in SaveState but now moved to MigrationState altogether, reverted its meaning, then renamed to "send_configuration". Again, using HW_COMPAT_2_3 for old PC/SPAPR machines, and accel_register_prop() for xen_init(). Removing savevm_skip_configuration(). Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1498536619-14548-8-git-send-email-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-06-28migration: move global_state.optional outPeter Xu1-1/+10
Put it into MigrationState then we can use the properties to specify whether to enable storing global state. Removing global_state_set_optional() since now we can use HW_COMPAT_2_3 for x86/power, and AccelClass.global_props for Xen. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1498536619-14548-6-git-send-email-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-06-13migration: Move remaining exported functions to migration/misc.hJuan Quintela1-1/+1
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-06-13migration: create global_state.cJuan Quintela1-0/+1
It don't belong anywhere else, just the global state where everybody can stick other things. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2017-06-02chardev: move headers to include/chardevMarc-André Lureau1-1/+1
So they are all in one place. The following patch will move serial & parallel declarations to the respective headers. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-02Remove/replace sysemu/char.h inclusionMarc-André Lureau1-1/+0
Those are apparently unnecessary includes. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-05-17xen-sysdev: Remove user_creatable flagEduardo Habkost1-5/+0
TYPE_XENSYSDEV is only used internally by xen_be_init(), and is not supposed to be plugged/unplugged dynamically. Remove the user_creatable flag from the device class. Cc: Juergen Gross <jgross@suse.com>, Cc: Peter Maydell <peter.maydell@linaro.org>, Cc: Thomas Huth <thuth@redhat.com> Cc: sstabellini@kernel.org Cc: Markus Armbruster <armbru@redhat.com>, Cc: Marcel Apfelbaum <marcel@redhat.com>, Cc: Laszlo Ersek <lersek@redhat.com> Acked-by: Juergen Gross <jgross@suse.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20170503203604.31462-21-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-17xen-backend: Remove FIXME comment about user_creatable flagEduardo Habkost1-4/+1
xen-backend can be plugged/unplugged dynamically when using the Xen accelerator, so keep the user_creatable flag on the device class and remove the FIXME comment. Cc: Juergen Gross <jgross@suse.com>, Cc: Peter Maydell <peter.maydell@linaro.org>, Cc: Thomas Huth <thuth@redhat.com> Cc: sstabellini@kernel.org Cc: Markus Armbruster <armbru@redhat.com>, Cc: Marcel Apfelbaum <marcel@redhat.com>, Cc: Laszlo Ersek <lersek@redhat.com> Acked-by: Juergen Gross <jgross@suse.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20170503203604.31462-4-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-17sysbus: Set user_creatable=false by default on TYPE_SYS_BUS_DEVICEEduardo Habkost1-0/+10
commit 33cd52b5d7b9adfd009e95f07e6c64dd88ae2a31 unset cannot_instantiate_with_device_add_yet in TYPE_SYSBUS, making all sysbus devices appear on "-device help" and lack the "no-user" flag in "info qdm". To fix this, we can set user_creatable=false by default on TYPE_SYS_BUS_DEVICE, but this requires setting user_creatable=true explicitly on the sysbus devices that actually work with -device. Fortunately today we have just a few has_dynamic_sysbus=1 machines: virt, pc-q35-*, ppce500, and spapr. virt, ppce500, and spapr have extra checks to ensure just a few device types can be instantiated: * virt supports only TYPE_VFIO_CALXEDA_XGMAC, TYPE_VFIO_AMD_XGBE. * ppce500 supports only TYPE_ETSEC_COMMON. * spapr supports only TYPE_SPAPR_PCI_HOST_BRIDGE. This patch sets user_creatable=true explicitly on those 4 device classes. Now, the more complex cases: pc-q35-*: q35 has no sysbus device whitelist yet (which is a separate bug). We are in the process of fixing it and building a sysbus whitelist on q35, but in the meantime we can fix the "-device help" and "info qdm" bugs mentioned above. Also, despite not being strictly necessary for fixing the q35 bug, reducing the list of user_creatable=true devices will help us be more confident when building the q35 whitelist. xen: We also have a hack at xen_set_dynamic_sysbus(), that sets has_dynamic_sysbus=true at runtime when using the Xen accelerator. This hack is only used to allow xen-backend devices to be dynamically plugged/unplugged. This means today we can use -device with the following 22 device types, that are the ones compiled into the qemu-system-x86_64 and qemu-system-i386 binaries: * allwinner-ahci * amd-iommu * cfi.pflash01 * esp * fw_cfg_io * fw_cfg_mem * generic-sdhci * hpet * intel-iommu * ioapic * isabus-bridge * kvmclock * kvm-ioapic * kvmvapic * SUNW,fdtwo * sysbus-ahci * sysbus-fdc * sysbus-ohci * unimplemented-device * virtio-mmio * xen-backend * xen-sysdev This patch adds user_creatable=true explicitly to those devices, temporarily, just to keep 100% compatibility with existing behavior of q35. Subsequent patches will remove user_creatable=true from the devices that are really not meant to user-creatable on any machine, and remove the FIXME comment from the ones that are really supposed to be user-creatable. This is being done in separate patches because we still don't have an obvious list of devices that will be whitelisted by q35, and I would like to get each device reviewed individually. Cc: Alexander Graf <agraf@suse.de> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Beniamino Galvani <b.galvani@gmail.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Frank Blaschka <frank.blaschka@de.ibm.com> Cc: Gabriel L. Somlo <somlo@cmu.edu> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: John Snow <jsnow@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Pierre Morel <pmorel@linux.vnet.ibm.com> Cc: Prasad J Pandit <pjp@fedoraproject.org> Cc: qemu-arm@nongnu.org Cc: qemu-block@nongnu.org Cc: qemu-ppc@nongnu.org Cc: Richard Henderson <rth@twiddle.net> Cc: Rob Herring <robh@kernel.org> Cc: Shannon Zhao <zhaoshenglong@huawei.com> Cc: sstabellini@kernel.org Cc: Thomas Huth <thuth@redhat.com> Cc: Yi Min Zhao <zyimin@linux.vnet.ibm.com> Acked-by: John Snow <jsnow@redhat.com> Acked-by: Juergen Gross <jgross@suse.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20170503203604.31462-3-ehabkost@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [ehabkost: Small changes at sysbus_device_class_init() comments] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-16xen: call qemu_set_cloexec instead of fcntlStefano Stabellini1-1/+1
Use the common utility function, which contains checks on return values and first calls F_GETFD as recommended by POSIX.1-2001, instead of manually calling fcntl. CID: 1374831 Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> CC: anthony.perard@citrix.com CC: groug@kaod.org CC: aneesh.kumar@linux.vnet.ibm.com CC: Eric Blake <eblake@redhat.com>
2017-05-04xen: use a better chardev type checkMarc-André Lureau1-1/+1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-04-25move xen-common.c to hw/xen/Anthony Xu2-1/+170
move xen-common.c to hw/xen/ Signed-off -by: Anthony Xu <anthony.xu@intel.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-04-25xen/9pfs: build and register Xen 9pfs backendStefano Stabellini1-0/+3
Signed-off-by: Stefano Stabellini <stefano@aporeto.com> Reviewed-by: Greg Kurz <groug@kaod.org> CC: anthony.perard@citrix.com CC: jgross@suse.com CC: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> CC: Greg Kurz <groug@kaod.org>
2017-04-21xen: use libxendevice model to restrict operationsPaul Durrant1-0/+1
This patch adds a command-line option (-xen-domid-restrict) which will use the new libxendevicemodel API to restrict devicemodel [1] operations to the specified domid. (Such operations are not applicable to the xenpv machine type). This patch also adds a tracepoint to allow successful enabling of the restriction to be monitored. [1] I.e. operations issued by libxendevicemodel. Operation issued by other xen libraries (e.g. libxenforeignmemory) are currently still unrestricted but this will be rectified by subsequent patches. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-03-22xen: make use of xen_xc implicit in xen_common.h inlinesPaul Durrant1-2/+0
Doing this will make the transition to using the new libxendevicemodel interface less intrusive on the callers of these functions, since using the new library will require a change of handle. NOTE: The patch also moves the 'externs' for xen_xc and xen_fmem from xen_backend.h to xen_common.h, and the declarations from xen_backend.c to xen-common.c, which is where they belong. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Anthony Perard <anthony.perard@citrix.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-03-19xen: do not build backends for targets that do not support xenStefano Stabellini1-1/+1
Change Makefile.objs to use CONFIG_XEN instead of CONFIG_XEN_BACKEND, so that the Xen backends are only built for targets that support Xen. Set CONFIG_XEN in the toplevel Makefile to ensure that files that are built only once pick up Xen support properly. Signed-off-by: Stefano Stabellini <stefano@aporeto.com> Tested-by: Greg Kurz <groug@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> CC: pbonzini@redhat.com CC: peter.maydell@linaro.org CC: rth@twiddle.net CC: stefanha@redhat.com Message-Id: <1489694518-16978-1-git-send-email-sstabellini@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-03Merge remote-tracking branch 'remotes/sstabellini/tags/xen-20170202' into ↵Peter Maydell1-6/+7
staging Xen 2017/02/02 # gpg: Signature made Thu 02 Feb 2017 18:26:58 GMT # gpg: using RSA key 0x894F8F4870E1AE90 # gpg: Good signature from "Stefano Stabellini <sstabellini@kernel.org>" # gpg: aka "Stefano Stabellini <stefano.stabellini@eu.citrix.com>" # Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90 * remotes/sstabellini/tags/xen-20170202: xen: use qdev_unplug() instead of g_free() in xen_pv_find_xendev() MAINTAINERS: Update xen-devel mailing list address xen-platform: add missing disk unplug option xen-platform: add support for unplugging NVMe disks... xen-platform: re-structure unplug_disks Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-02xen: use qdev_unplug() instead of g_free() in xen_pv_find_xendev()Juergen Gross1-6/+7
The error exits of xen_pv_find_xendev() free the new xen-device via g_free() which is wrong. As the xen-device has been initialized as qdev it must be removed via qdev_unplug(). This bug has been introduced with commit 3a6c9172ac5951e6dac2b3f6 ("xen: create qdev for each backend device"). Reported-by: Roger Pau Monné <roger.pau@citrix.com> Tested-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-01-31trace: move hw/xen events to correct subdirDaniel P. Berrange1-0/+13
The trace-events for a given source file should generally always live in the same directory as the source file. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170125161417.31949-4-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-22xen: create qdev for each backend deviceJuergen Gross2-1/+50
Create a qdev plugged to the xen-sysbus for each new backend device. This device can be used as a parent for all needed devices of that backend. The id of the new device will be "xen-<type>-<dev>" with <type> being the xen backend type (e.g. "qdisk") and <dev> the xen backend number of the type under which it is to be found in xenstore. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2016-11-22xen: add an own bus for xen backend devicesJuergen Gross1-3/+16
Add a bus for Xen backend devices in order to be able to establish a dedicated device path for pluggable devices. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2016-11-02hw/xen/xen_pvdev: Include qemu/log.h for qemu_log_vprintf()Thomas Huth1-1/+1
Olaf Hering reported a build failure due to an undefined reference to 'qemu_log_vprintf'. Explicitely including qemu/log.h seems to fix the issue. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Tested-by: Olaf Hering <olaf@aepfle.de>
2016-10-28xen: Rename xen_be_del_xendevEmil Condrea2-2/+2
Prepare xen_be_del_xendev to be shared with frontends: * xen_be_del_xendev -> xen_pv_del_xendev Signed-off-by: Emil Condrea <emilcondrea@gmail.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Quan Xu <xuquan8@huawei.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2016-10-28xen: Rename xen_be_find_xendevEmil Condrea2-2/+2
Prepare xen_be_find_xendev to be shared with frontends: * xen_be_find_xendev -> xen_pv_find_xendev Signed-off-by: Emil Condrea <emilcondrea@gmail.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Quan Xu <xuquan8@huawei.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2016-10-28xen: Rename xen_be_evtchn_eventEmil Condrea2-2/+2
Prepare xen_be_evtchn_event to be shared with frontends: * xen_be_evtchn_event -> xen_pv_evtchn_event Signed-off-by: Emil Condrea <emilcondrea@gmail.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Quan Xu <xuquan8@huawei.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2016-10-28xen: Rename xen_be_send_notifyEmil Condrea1-1/+1
Prepare xen_be_send_notify to be shared with frontends: * xen_be_send_notify -> xen_pv_send_notify Signed-off-by: Emil Condrea <emilcondrea@gmail.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Quan Xu <xuquan8@huawei.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-05-18 16:42:43 +0000