| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
What static=on really does is what we call metadata preallocation for
other block drivers. While we can still change the QMP interface, make
it more consistent by using 'preallocation' for VDI, too.
This doesn't implement any new functionality, so the only supported
preallocation modes are 'off' and 'metadata' for now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Set (and clear) histograms through new command
block-latency-histogram-set and show new statistics in
query-blockstats results.
For now, the command is marked experimental with prefix 'x-',
to gain experience with the interface without being stuck
with design decisions.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180309165212.97144-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[eblake: fix typos, mention x- prefix in commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
We have a clear replacement, so let's deprecate it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-8-mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
When doing drive mirror to a low speed shared storage, if there was heavy
BLK IO write workload in VM after the 'ready' event, drive mirror block job
can't be canceled immediately, it would keep running until the heavy BLK IO
workload stopped in the VM.
Libvirt depends on the current block-job-cancel semantics, which is that
when used without a flag after the 'ready' event, the command blocks
until data is in sync. However, these semantics are awkward in other
situations, for example, people may use drive mirror for realtime
backups while still wanting to use block live migration. Libvirt cannot
start a block live migration while another drive mirror is in progress,
but the user would rather abandon the backup attempt as broken and
proceed with the live migration than be stuck waiting for the current
drive mirror backup to finish.
The drive-mirror command already includes a 'force' flag, which libvirt
does not use, although it documented the flag as only being useful to
quit a job which is paused. However, since quitting a paused job has
the same effect as abandoning a backup in a non-paused job (namely, the
destination file is not in sync, and the command completes immediately),
we can just improve the documentation to make the force flag obviously
useful.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Reported-by: Huaitong Han <huanhuaitong@didichuxing.com>
Signed-off-by: Huaitong Han <huanhuaitong@didichuxing.com>
Signed-off-by: Liang Li <liliangleo@didichuxing.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds the .bdrv_co_create driver callback to vpc, which
enables image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
This adds the .bdrv_co_create driver callback to vhdx, which
enables image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
This adds the .bdrv_co_create driver callback to qed, which
enables image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
This adds the .bdrv_co_create driver callback to qcow, which
enables image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
|
|
This adds the .bdrv_co_create driver callback to parallels, which
enables image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
|
|
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
In preparation of QAPI-fying VDI image creation, we have to create a
BlockdevCreateOptionsVdi type which is received by a (future)
vdi_co_create().
vdi_co_create_opts() now converts the QemuOpts object into such a
BlockdevCreateOptionsVdi object. The protocol-layer file is still
created in vdi_co_do_create() (and BlockdevCreateOptionsVdi.file is set
to an empty string), but that will be addressed by a follow-up patch.
Note that cluster-size is not part of the QAPI schema because it is not
supported by default.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds the .bdrv_co_create driver callback to luks, which enables
image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Expose the "manual" property via QAPI for the backup-related jobs.
As of this commit, this allows the management API to request the
"concluded" and "dismiss" semantics for backup jobs.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Instead of automatically transitioning from PENDING to CONCLUDED, gate
the .prepare() and .commit() phases behind an explicit acknowledgement
provided by the QMP monitor if auto_finalize = false has been requested.
This allows us to perform graph changes in prepare and/or commit so that
graph changes do not occur autonomously without knowledge of the
controlling management layer.
Transactions that have reached the "PENDING" state together can all be
moved to invoke their finalization methods by issuing block_job_finalize
to any one job in the transaction.
Jobs in a transaction with mixed job->auto_finalize settings will all
remain stuck in the "PENDING" state, as if the entire transaction was
specified with auto_finalize = false. Jobs that specified
auto_finalize = true, however, will still not emit the PENDING event.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
For jobs utilizing the new manual workflow, we intend to prohibit
them from modifying the block graph until the management layer provides
an explicit ACK via block-job-finalize to move the process forward.
To distinguish this runstate from "ready" or "waiting," we add a new
"pending" event and status.
For now, the transition from PENDING to CONCLUDED/ABORTING is automatic,
but a future commit will add the explicit block-job-finalize step.
Transitions:
Waiting -> Pending: Normal transition.
Pending -> Concluded: Normal transition.
Pending -> Aborting: Late transactional failures and cancellations.
Removed Transitions:
Waiting -> Concluded: Jobs must go to PENDING first.
Verbs:
Cancel: Can be applied to a pending job.
+---------+
|UNDEFINED|
+--+------+
|
+--v----+
+---------+CREATED+-----------------+
| +--+----+ |
| | |
| +--+----+ +------+ |
+---------+RUNNING<----->PAUSED| |
| +--+-+--+ +------+ |
| | | |
| | +------------------+ |
| | | |
| +--v--+ +-------+ | |
+---------+READY<------->STANDBY| | |
| +--+--+ +-------+ | |
| | | |
| +--v----+ | |
+---------+WAITING<---------------+ |
| +--+----+ |
| | |
| +--v----+ |
+---------+PENDING| |
| +--+----+ |
| | |
+--v-----+ +--v------+ |
|ABORTING+--->CONCLUDED| |
+--------+ +--+------+ |
| |
+--v-+ |
|NULL<--------------------+
+----+
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
For jobs that are stuck waiting on others in a transaction, it would
be nice to know that they are no longer "running" in that sense, but
instead are waiting on other jobs in the transaction.
Jobs that are "waiting" in this sense cannot be meaningfully altered
any longer as they have left their running loop. The only meaningful
user verb for jobs in this state is "cancel," which will cancel the
whole transaction, too.
Transitions:
Running -> Waiting: Normal transition.
Ready -> Waiting: Normal transition.
Waiting -> Aborting: Transactional cancellation.
Waiting -> Concluded: Normal transition.
Removed Transitions:
Running -> Concluded: Jobs must go to WAITING first.
Ready -> Concluded: Jobs must go to WAITING first.
Verbs:
Cancel: Can be applied to WAITING jobs.
+---------+
|UNDEFINED|
+--+------+
|
+--v----+
+---------+CREATED+-----------------+
| +--+----+ |
| | |
| +--v----+ +------+ |
+---------+RUNNING<----->PAUSED| |
| +--+-+--+ +------+ |
| | | |
| | +------------------+ |
| | | |
| +--v--+ +-------+ | |
+---------+READY<------->STANDBY| | |
| +--+--+ +-------+ | |
| | | |
| +--v----+ | |
+---------+WAITING<---------------+ |
| +--+----+ |
| | |
+--v-----+ +--v------+ |
|ABORTING+--->CONCLUDED| |
+--------+ +--+------+ |
| |
+--v-+ |
|NULL<--------------------+
+----+
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
For jobs that have reached their CONCLUDED state, prior to having their
last reference put down (meaning jobs that have completed successfully,
unsuccessfully, or have been canceled), allow the user to dismiss the
job's lingering status report via block-job-dismiss.
This gives management APIs the chance to conclusively determine if a job
failed or succeeded, even if the event broadcast was missed.
Note: block_job_do_dismiss and block_job_decommission happen to do
exactly the same thing, but they're called from different semantic
contexts, so both aliases are kept to improve readability.
Note 2: Don't worry about the 0x04 flag definition for AUTO_DISMISS, she
has a friend coming in a future patch to fill the hole where 0x02 is.
Verbs:
Dismiss: operates on CONCLUDED jobs only.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Add a new state that specifically demarcates when we begin to permanently
demolish a job after it has performed all work. This makes the transition
explicit in the STM table and highlights conditions under which a job may
be demolished.
Alongside this state, add a new helper command "block_job_decommission",
which transitions to the NULL state and puts down our implicit reference.
This separates instances in the code for "block_job_unref" which merely
undo a matching "block_job_ref" with instances intended to initiate the
full destruction of the object.
This decommission action also sets a number of fields to make sure that
block internals or external users that are holding a reference to a job
to see when it "finishes" are convinced that the job object is "done."
This is necessary, for instance, to do a block_job_cancel_sync on a
created object which will not make any progress.
Now, all jobs must go through block_job_decommission prior to being
freed, giving us start-to-finish state machine coverage for jobs.
Transitions:
Created -> Null: Early failure event before the job is started
Concluded -> Null: Standard transition.
Verbs:
None. This should not ever be visible to the monitor.
+---------+
|UNDEFINED|
+--+------+
|
+--v----+
+---------+CREATED+------------------+
| +--+----+ |
| | |
| +--v----+ +------+ |
+---------+RUNNING<----->PAUSED| |
| +--+-+--+ +------+ |
| | | |
| | +------------------+ |
| | | |
| +--v--+ +-------+ | |
+---------+READY<------->STANDBY| | |
| +--+--+ +-------+ | |
| | | |
+--v-----+ +--v------+ | |
|ABORTING+--->CONCLUDED<-------------+ |
+--------+ +--+------+ |
| |
+--v-+ |
|NULL<---------------------+
+----+
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
add a new state "CONCLUDED" that identifies a job that has ceased all
operations. The wording was chosen to avoid any phrasing that might
imply success, error, or cancellation. The task has simply ceased all
operation and can never again perform any work.
("finished", "done", and "completed" might all imply success.)
Transitions:
Running -> Concluded: normal completion
Ready -> Concluded: normal completion
Aborting -> Concluded: error and cancellations
Verbs:
None as of this commit. (a future commit adds 'dismiss')
+---------+
|UNDEFINED|
+--+------+
|
+--v----+
+---------+CREATED|
| +--+----+
| |
| +--v----+ +------+
+---------+RUNNING<----->PAUSED|
| +--+-+--+ +------+
| | |
| | +------------------+
| | |
| +--v--+ +-------+ |
+---------+READY<------->STANDBY| |
| +--+--+ +-------+ |
| | |
+--v-----+ +--v------+ |
|ABORTING+--->CONCLUDED<-------------+
+--------+ +---------+
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Add a new state ABORTING.
This makes transitions from normative states to error states explicit
in the STM, and serves as a disambiguation for which states may complete
normally when normal end-states (CONCLUDED) are added in future commits.
Notably, Paused/Standby jobs do not transition directly to aborting,
as they must wake up first and cooperate in their cancellation.
Transitions:
Created -> Aborting: can be cancelled (by the system)
Running -> Aborting: can be cancelled or encounter an error
Ready -> Aborting: can be cancelled or encounter an error
Verbs:
None. The job must finish cleaning itself up and report its final status.
+---------+
|UNDEFINED|
+--+------+
|
+--v----+
+---------+CREATED|
| +--+----+
| |
| +--v----+ +------+
+---------+RUNNING<----->PAUSED|
| +--+----+ +------+
| |
| +--v--+ +-------+
+---------+READY<------->STANDBY|
| +-----+ +-------+
|
+--v-----+
|ABORTING|
+--------+
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Which commands ("verbs") are appropriate for jobs in which state is
also somewhat burdensome to keep track of.
As of this commit, it looks rather useless, but begins to look more
interesting the more states we add to the STM table.
A recurring theme is that no verb will apply to an 'undefined' job.
Further, it's not presently possible to restrict the "pause" or "resume"
verbs any more than they are in this commit because of the asynchronous
nature of how jobs enter the PAUSED state; justifications for some
seemingly erroneous applications are given below.
=====
Verbs
=====
Cancel: Any state except undefined.
Pause: Any state except undefined;
'created': Requests that the job pauses as it starts.
'running': Normal usage. (PAUSED)
'paused': The job may be paused for internal reasons,
but the user may wish to force an indefinite
user-pause, so this is allowed.
'ready': Normal usage. (STANDBY)
'standby': Same logic as above.
Resume: Any state except undefined;
'created': Will lift a user's pause-on-start request.
'running': Will lift a pause request before it takes effect.
'paused': Normal usage.
'ready': Will lift a pause request before it takes effect.
'standby': Normal usage.
Set-speed: Any state except undefined, though ready may not be meaningful.
Complete: Only a 'ready' job may accept a complete request.
=======
Changes
=======
(1)
To facilitate "nice" error checking, all five major block-job verb
interfaces in blockjob.c now support an errp parameter:
- block_job_user_cancel is added as a new interface.
- block_job_user_pause gains an errp paramter
- block_job_user_resume gains an errp parameter
- block_job_set_speed already had an errp parameter.
- block_job_complete already had an errp parameter.
(2)
block-job-pause and block-job-resume will no longer no-op when trying
to pause an already paused job, or trying to resume a job that isn't
paused. These functions will now report that they did not perform the
action requested because it was not possible.
iotests have been adjusted to address this new behavior.
(3)
block-job-complete doesn't worry about checking !block_job_started,
because the permission table guards against this.
(4)
test-bdrv-drain's job implementation needs to announce that it is
'ready' now, in order to be completed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We're about to add several new states, and booleans are becoming
unwieldly and difficult to reason about. It would help to have a
more explicit bookkeeping of the state of blockjobs. To this end,
add a new "status" field and add our existing states in a redundant
manner alongside the bools they are replacing:
UNDEFINED: Placeholder, default state. Not currently visible to QMP
unless changes occur in the future to allow creating jobs
without starting them via QMP.
CREATED: replaces !!job->co && paused && !busy
RUNNING: replaces effectively (!paused && busy)
PAUSED: Nearly redundant with info->paused, which shows pause_count.
This reports the actual status of the job, which almost always
matches the paused request status. It differs in that it is
strictly only true when the job has actually gone dormant.
READY: replaces job->ready.
STANDBY: Paused, but job->ready is true.
New state additions in coming commits will not be quite so redundant:
WAITING: Waiting on transaction. This job has finished all the work
it can until the transaction converges, fails, or is canceled.
PENDING: Pending authorization from user. This job has finished all the
work it can until the job or transaction is finalized via
block_job_finalize. This implies the transaction has converged
and left the WAITING phase.
ABORTING: Job has encountered an error condition and is in the process
of aborting.
CONCLUDED: Job has ceased all operations and has a return code available
for query and may be dismissed via block_job_dismiss.
NULL: Job has been dismissed and (should) be destroyed. Should never
be visible to QMP.
Some of these states appear somewhat superfluous, but it helps define the
expected flow of a job; so some of the states wind up being synchronous
empty transitions. Importantly, jobs can be in only one of these states
at any given time, which helps code and external users alike reason about
the current condition of a job unambiguously.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Add special state, when qmp operations on the bitmap are disabled.
It is needed during bitmap migration. "Frozen" state is not
appropriate here, because it looks like bitmap is unchanged.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180207155837.92351-5-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
This adds the .bdrv_co_create driver callback to ssh, which enables
image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
This makes the host-key-check option available in blockdev-add.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
This adds the .bdrv_co_create driver callback to sheepdog, which enables
image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
The "redundancy" option for Sheepdog image creation is currently a
string that can encode one or two integers depending on its format,
which at the same time implicitly selects a mode.
This patch turns it into a QAPI union and converts the string into such
a QAPI object before interpreting the values.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
This adds the .bdrv_co_create driver callback to nfs, which enables
image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
This adds the .bdrv_co_create driver callback to rbd, which enables
image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
This adds the .bdrv_co_create driver callback to gluster, which enables
image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
This adds the .bdrv_co_create driver callback to file, which enables
image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
This adds a synchronous x-blockdev-create QMP command that can create
qcow2 images on a given node name.
We don't want to block while creating an image, so this is not the final
interface in all aspects, but BlockdevCreateOptionsQcow2 and
.bdrv_co_create() are what they actually might look like in the end. In
any case, this should be good enough to test whether we interpret
BlockdevCreateOptions as we should.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
This creates a BlockdevCreateOptions union type that will contain all of
the options for image creation. We'll start out with an empty struct
type BlockdevCreateNotSupported for all drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
blk_error_action() sends a BLOCK_IO_ERROR QMP event which includes the
node name of its root node. If the BlockBackend represents an empty
drive, there is no root node, so we should not try to access its node
name. Make the field optional in the event and include it only when
the BlockBackend isn't empty.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Now that the code is ready to handle L2 slices we can finally add an
option to allow configuring their size.
An L2 slice is the portion of an L2 table that is read by the qcow2
cache. Until now the cache was always reading full L2 tables, and
since the L2 table size is equal to the cluster size this was not very
efficient with large clusters. Here's a more detailed explanation of
why it makes sense to have smaller cache entries in order to load L2
data:
https://lists.gnu.org/archive/html/qemu-block/2017-09/msg00635.html
This patch introduces a new command-line option to the qcow2 driver
named l2-cache-entry-size (cf. l2-cache-size). The cache entry size
has the same restrictions as the cluster size: it must be a power of
two and it has the same range of allowed values, with the additional
requirement that it must not be larger than the cluster size.
The L2 cache entry size (L2 slice size) remains equal to the cluster
size for now by default, so this feature must be explicitly enabled.
Although my tests show that 4KB slices consistently improve
performance and give the best results, let's wait and make more tests
with different cluster sizes before deciding on an optimal default.
Now that the cache entry size is not necessarily equal to the cluster
size we need to reflect that in the MIN_L2_CACHE_SIZE documentation.
That minimum value is a requirement of the COW algorithm: we need to
read two L2 slices (and not two L2 tables) in order to do COW, see
l2_allocate() for the actual code.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: c73e5611ff4a9ec5d20de68a6c289553a13d2354.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
To maintain load/store disabled bitmap there is new approach:
- deprecate @autoload flag of block-dirty-bitmap-add, make it ignored
- store enabled bitmaps as "auto" to qcow2
- store disabled bitmaps without "auto" flag to qcow2
- on qcow2 open load "auto" bitmaps as enabled and others
as disabled (except in_use bitmaps)
Also, adjust iotests 165 and 176 appropriately.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180202160752.143796-1-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180116060901.17413-10-famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
|
|
Block layer patches
# gpg: Signature made Tue 23 Jan 2018 12:38:36 GMT
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (29 commits)
iotests: Disable some tests for compat=0.10
iotests: Split 177 into two parts for compat=0.10
iotests: Make 059 pass on machines with little RAM
iotests: Filter compat-dependent info in 198
iotests: Make 191 work with qcow2 options
iotests: Make 184 image-less
iotests: Make 089 compatible with compat=0.10
iotests: Fix 067 for compat=0.10
iotests: Fix 059's reference output
iotests: Fix 051 for compat=0.10
iotests: Fix 020 for vmdk
iotests: Skip 103 for refcount_bits=1
iotests: Forbid 020 for non-file protocols
iotests: Drop format-specific in _filter_img_info
iotests: Fix _img_info for backslashes
block/vmdk: Add blkdebug events
block/qcow: Add blkdebug events
qcow2: No persistent dirty bitmaps for compat=0.10
block/vmdk: Fix , instead of ; at end of line
qemu-iotests: Fix locking issue in 102
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Now that iotest 093 test proves that the throttling configuration
survives a blockdev-remove-medium/blockdev-insert-medium pair, the
original reason for declaring these commands experimental is gone
(see commit 6e0abc251dd4f8eba1f53656dfede12e5840e83b).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110224302.14424-5-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
This is an incompatible change, which is fine as the commands are
experimental.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110224302.14424-4-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
The block_set_io_throttle command can look up BlockBackends by the
attached qdev device ID. virtio-blk-pci is a special case because the
actual VirtIOBlock device is the "/virtio-backend" child of the PCI
adapter device.
Add a QMP schema example so clients will know how to use
block_set_io_throttle on the virtio-blk-pci device.
The alternative is to implement some sort of aliasing for qmp_get_blk()
but that is likely to cause confusion and could break future use cases.
Let's not go there.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180117090700.25811-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Removing a quorum child node with x-blockdev-change results in a quorum
driver state that cannot be recreated with create options because it
would require a list with gaps. This causes trouble in at least
.bdrv_refresh_filename().
Document this problem so that we won't accidentally mark the command
stable without having addressed it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
|
|
When a node is already associated with a BlockBackend the
x-blockdev-set-iothread command refuses to set the IOThread. This is to
prevent accidentally changing the IOThread when the nodes are in use.
When the nodes are created with -drive they automatically get a
BlockBackend. In that case we know nothing is using them yet and it's
safe to set the IOThread. Add a force boolean to override the check.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171207201320.19284-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Currently there is no easy way for iotests to ensure that a BDS is bound
to a particular IOThread. Normally the virtio-blk device calls
blk_set_aio_context() when dataplane is enabled during guest driver
initialization. This never happens in iotests since -machine
accel=qtest means there is no guest activity (including device driver
initialization).
This patch adds a QMP command to explicitly assign IOThreads in test
cases. See qapi/block-core.json for a description of the command.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171206144550.22295-9-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
When you cancel an in-progress 'mirror' job (or "active `block-commit`")
with QMP `block-job-cancel`, it emits the event: BLOCK_JOB_CANCELLED.
However, when `block-job-cancel` is issued *after* `drive-mirror` has
indicated (via the event BLOCK_JOB_READY) that the source and
destination have reached synchronization:
[...] # Snip `drive-mirror` invocation & outputs
{
"execute":"block-job-cancel",
"arguments":{
"device":"virtio0"
}
}
{"return": {}}
It (`block-job-cancel`) will counterintuitively emit the event
'BLOCK_JOB_COMPLETED':
{
"timestamp":{
"seconds":1510678024,
"microseconds":526240
},
"event":"BLOCK_JOB_COMPLETED",
"data":{
"device":"virtio0",
"len":41126400,
"offset":41126400,
"speed":0,
"type":"mirror"
}
}
But this is expected behaviour, where the _COMPLETED event indicates
that synchronization has successfully ended (and the destination now has
a point-in-time copy, which is at the time of cancel).
So add a small note to this effect in 'block-core.json'. While at it,
also update the "Live disk synchronization -- drive-mirror and
blockdev-mirror" section in 'live-block-operations.rst'.
(Thanks: Max Reitz for reminding me of this caveat on IRC.)
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
bdrv_set_read_only() is used by some block drivers to override the
read-only option given by the user. This is not how read-only images
generally work in QEMU: Instead of second guessing what the user really
meant (which currently includes making an image read-only even if the
user didn't only use the default, but explicitly said read-only=off), we
should error out if we can't provide what the user requested.
This adds deprecation warnings to all callers of bdrv_set_read_only() so
that the behaviour can be corrected after the usual deprecation period.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Make it possible to inject errors on writes performed during a
read operation due to copy-on-read semantics.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This patch add shrinking of the image file for qcow2. As a result, this allows
us to reduce the virtual image size and free up space on the disk without
copying the image. Image can be fragmented and shrink is done by punching holes
in the image file.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170918124230.8152-4-pbutsykin@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
It is a common requirement for virtual machine to send persistent
reservations, but this currently requires either running QEMU with
CAP_SYS_RAWIO, or using out-of-tree patches that let an unprivileged
QEMU bypass Linux's filter on SG_IO commands.
As an alternative mechanism, the next patches will introduce a
privileged helper to run persistent reservation commands without
expanding QEMU's attack surface unnecessarily.
The helper is invoked through a "pr-manager" QOM object, to which
file-posix.c passes SG_IO requests for PERSISTENT RESERVE OUT and
PERSISTENT RESERVE IN commands. For example:
$ qemu-system-x86_64
-device virtio-scsi \
-object pr-manager-helper,id=helper0,path=/var/run/qemu-pr-helper.sock
-drive if=none,id=hd,driver=raw,file.filename=/dev/sdb,file.pr-manager=helper0
-device scsi-block,drive=hd
or:
$ qemu-system-x86_64
-device virtio-scsi \
-object pr-manager-helper,id=helper0,path=/var/run/qemu-pr-helper.sock
-blockdev node-name=hd,driver=raw,file.driver=host_device,file.filename=/dev/sdb,file.pr-manager=helper0
-device scsi-block,drive=hd
Multiple pr-manager implementations are conceivable and possible, though
only one is implemented right now. For example, a pr-manager could:
- talk directly to the multipath daemon from a privileged QEMU
(i.e. QEMU links to libmpathpersist); this makes reservation work
properly with multipath, but still requires CAP_SYS_RAWIO
- use the Linux IOC_PR_* ioctls (they require CAP_SYS_ADMIN though)
- more interestingly, implement reservations directly in QEMU
through file system locks or a shared database (e.g. sqlite)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
