summaryrefslogtreecommitdiff
path: root/tcg/i386/tcg-target.h
AgeCommit message (Collapse)AuthorFilesLines
2018-02-08tcg/i386: Add vector operationsRichard Henderson1-2/+39
The x86 vector instruction set is extremely irregular. With newer editions, Intel has filled in some of the blanks. However, we don't get many 64-bit operations until SSE4.2, introduced in 2009. The subsequent edition was for AVX1, introduced in 2011, which added three-operand addressing, and adjusts how all instructions should be encoded. Given the relatively narrow 2 year window between possible to support and desirable to support, and to vastly simplify code maintainence, I am only planning to support AVX1 and later cpus. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-07tcg/i386: Store out-of-range call targets in constant poolRichard Henderson1-0/+1
Already it saves 2 bytes per call, but also the constant pool entry may well be shared across multiple calls. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-07tcg: Rearrange ldst label trackingRichard Henderson1-0/+4
Dispense with TCGBackendData, as it has never been used for more than holding a single pointer. Use a define in the cpu/tcg-target.h to signal requirement for TCGLabelQemuLdst, so that we can drop the no-op tcg-be-null.h stubs. Rename tcg-be-ldst.h to tcg-ldst.inc.c. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-07tcg: Move USE_DIRECT_JUMP discriminator to tcg/cpu/tcg-target.hRichard Henderson1-0/+9
Replace the USE_DIRECT_JUMP ifdef with a TCG_TARGET_HAS_direct_jump boolean test. Replace the tb_set_jmp_target1 ifdef with an unconditional function tb_target_set_jmp_target. While we're touching all backends, add a parameter for tb->tc_ptr; we're going to need it shortly for some backends. Move tb_set_jmp_target and tb_add_jump from exec-all.h to cpu-exec.c. This opens the possibility for TCG_TARGET_HAS_direct_jump to be a runtime decision -- based on host cpu capabilities, the size of code_gen_buffer, or a future debugging switch. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-05tcg/i386: implement goto_ptrEmilio G. Cota1-1/+1
Suggested-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <1493263764-18657-6-git-send-email-cota@braap.org> [rth: Reuse goto_ptr epilogue for exit_tb 0.] Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-05tcg: Introduce goto_ptr opcode and tcg_gen_lookup_and_goto_ptrEmilio G. Cota1-0/+1
Instead of exporting goto_ptr directly to TCG frontends, export tcg_gen_lookup_and_goto_ptr(), which calls goto_ptr with the pointer returned by the lookup_tb_ptr() helper. This is the only use case we have for goto_ptr and lookup_tb_ptr, so having this function is very convenient. Furthermore, it trivially allows us to avoid calling the lookup helper if goto_ptr is not implemented by the backend. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <1493263764-18657-2-git-send-email-cota@braap.org> Message-Id: <1493263764-18657-3-git-send-email-cota@braap.org> Message-Id: <1493263764-18657-4-git-send-email-cota@braap.org> Message-Id: <1493263764-18657-5-git-send-email-cota@braap.org> [rth: Squashed 4 related commits.] Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-24tcg: enable MTTCG by default for ARM on x86 hostsAlex Bennée1-0/+11
This enables the multi-threaded system emulation by default for ARMv7 and ARMv8 guests using the x86_64 TCG backend. This is because on the guest side: - The ARM translate.c/translate-64.c have been converted to - use MTTCG safe atomic primitives - emit the appropriate barrier ops - The ARM machine has been updated to - hold the BQL when modifying shared cross-vCPU state - defer powerctl changes to async safe work All the host backends support the barrier and atomic primitives but need to provide same-or-better support for normal load/store operations. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Acked-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Pranith Kumar <bobby.prani@gmail.com> Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2017-01-10tcg/i386: Handle ctpop opcodeRichard Henderson1-2/+3
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg: Add opcode for ctpopRichard Henderson1-0/+2
The number of actual invocations of ctpop itself does not warrent an opcode, but it is very helpful for POWER7 to use in generating an expansion for ctz. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg/i386: Handle ctz and clz opcodesRichard Henderson1-4/+4
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg: Add clz and ctz opcodesRichard Henderson1-0/+4
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg/i386: Implement field extraction opcodesRichard Henderson1-3/+9
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg: Add field extraction primitivesRichard Henderson1-0/+4
Adds tcg_gen_extract_* and tcg_gen_sextract_* for extraction of fixed position bitfields, much like we already have for deposit. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-07-12tcg: Clean up tcg-target.h header guardsMarkus Armbruster1-2/+3
These use guard symbols like TCG_TARGET_$target. scripts/clean-header-guards.pl doesn't like them because they don't match their file name (they should, to make guard collisions less likely). Clean them up: use guard symbol $target_TCG_TARGET_H for tcg/$target/tcg-target.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg: Split trunc_shr_i32 opcode into extr[lh]_i64_i32Richard Henderson1-1/+2
Rather than allow arbitrary shift+trunc, only concern ourselves with low and high parts. This is all that was being used anyway. Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg: rename trunc_shr_i32 into trunc_shr_i64_i32Aurelien Jarno1-1/+1
The op is sometimes named trunc_shr_i32 and sometimes trunc_shr_i64_i32, and the name in the README doesn't match the name offered to the frontends. Always use the long name to make it clear it is a size changing op. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-06-03tcg: add TCG_TARGET_TLB_DISPLACEMENT_BITSPaolo Bonzini1-0/+1
This will be used to size the TLB when more than 8 MMU modes are used by the target. Limitations come from the limited size of the immediate fields (which sometimes, as in the case of Aarch64, extend to instructions that shift the immediate). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1424436345-37924-2-git-send-email-pbonzini@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-04tcg: Remove TCG_TARGET_HAS_new_ldstRichard Henderson1-2/+0
Since all backends have been converted, remove the compatibility code. Acked-by: Claudio Fontana <claudio.fontana@huawei.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-12tcg-i386: Define TCG_TARGET_INSN_UNIT_SIZERichard Henderson1-0/+2
And use tcg pointer differencing functions as appropriate. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-28tcg: Add INDEX_op_trunc_shr_i32Richard Henderson1-0/+1
Let the backend do something special for truncation. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-18tcg: Use HOST_WORDS_BIGENDIANRichard Henderson1-2/+0
Instead of rolling a local TCG_TARGET_WORDS_BIGENDIAN. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-02-17tcg/i386: Use ANDN instructionRichard Henderson1-2/+4
Note that the optimizer cannot simplify ANDC X,Y,C to AND X,Y,~C so we must handle constants in the implementation of andc. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-02-17tcg/i386: Move TCG_CT_CONST_* to tcg-target.cRichard Henderson1-3/+0
These are not needed by users of tcg-target.h. No need to recompile when we adjust them. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-i386: Support new ldst opcodesRichard Henderson1-1/+1
No support for helpers with non-default endianness yet, but good enough to test the opcodes. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Add qemu_ld_st_i32/64Richard Henderson1-0/+2
Step two in the transition, adding the new ldst opcodes. Keep the old opcodes around until all backends support the new opcodes. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Allow TCG_TARGET_REG_BITS to be specified independantlyRichard Henderson1-4/+6
There are several hosts for which it would be useful to use the available 64-bit registers in a 32-bit pointer environment. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change flush_icache_range arguments to uintptr_tRichard Henderson1-2/+1
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Add muluh and mulsh opcodesRichard Henderson1-0/+4
Use them in places where mulu2 and muls2 are used. Optimize mulx2 with dead low part to mulxh. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-02-23tcg-i386: Implement multiword arithmetic opsRichard Henderson1-5/+5
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23tcg: Add signed multiword multiplication operationsRichard Henderson1-0/+2
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23tcg: Add 64-bit multiword arithmetic operationsRichard Henderson1-0/+3
Matching the 32-bit multiword arithmetic that we already have. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23tcg-i386: Always implement 32-bit multiword opsRichard Henderson1-4/+3
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23tcg: Make 32-bit multiword operations optional for 64-bit hostsRichard Henderson1-0/+4
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-29tcg-i386: Perform cmov detection at runtime for 32-bit.Richard Henderson1-5/+0
Existing compile-time detection is spotty at best. Convert it all to runtime detection instead. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-19janitor: add guards to headersPaolo Bonzini1-0/+3
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-12tcg: Remove TCG_TARGET_HAS_GUEST_BASE definePeter Maydell1-2/+0
GUEST_BASE support is now supported by all TCG backends, and is now mandatory. Drop the now-pointless TCG_TARGET_HAS_GUEST_BASE define (set by every backend) and the error if it is unset. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-09-22w64: Fix TCG helper functions with 5 argumentsStefan Weil1-0/+4
TCG uses 6 registers for function arguments on 64 bit Linux hosts, but only 4 registers on W64 hosts. Commit 2999a0b20074a7e4a58f56572bb1436749368f59 increased the number of arguments for some important helper functions from 4 to 5 which triggered a bug for W64 hosts: QEMU aborts when executing helper_lcall_real in the guest's BIOS because function tcg_target_get_call_iarg_regs_count always returned 6. As W64 has only 4 registers for arguments, the 5th argument must be passed on the stack using a correct stack offset. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21tcg-i386: Implement movcondRichard Henderson1-1/+6
Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21tcg: Introduce movcondRichard Henderson1-0/+2
Implemented with setcond if the target does not provide the optional opcode. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-15Remove unused CONFIG_TCG_PASS_AREG0 and dead codeBlue Swirl1-1/+0
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets, remove dead code and support for !CONFIG_TCG_PASS_AREG0 case. Remove dyngen-exec.h and all references to it. Although included by hw/spapr_hcall.c, it does not seem to use it. Remove unused HELPER_CFLAGS. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-03-03w64: Fix data type of parameters for flush_icache_rangeStefan Weil1-1/+2
flush_icache_range takes two address parameters which must be large enough to address any address of the host. For hosts with sizeof(unsigned long) == sizeof(void *), this patch changes nothing. All currently supported hosts fall into this category. For w64 hosts, sizeof(unsigned long) is 4 while sizeof(void *) is 8, so the use of tcg_target_ulong is needed for i386 and tci (the tcg targets which work with w64). Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-12-09tcg: Remove redundant declarations of TCG_TARGET_REG_BITSStefan Weil1-5/+0
TCG_TARGET_REG_BITS is declared in tcg.h for all TCG targets. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-11-14tcg: Standardize on TCGReg as the enum for hard registersRichard Henderson1-2/+2
Most targets did not name the enum; tci used TCGRegister. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-01tcg-i386: Introduce limited deposit supportJan Kiszka1-2/+7
x86 cannot provide an optimized generic deposit implementation. But at least for a few special cases, namely for writing bits 0..7, 8..15, and 0..15, versions using only a single instruction are feasible. Introducing such limited support improves emulating 16-bit x86 code on x86, but also rarer cases where 32-bit or 64-bit code accesses bytes or words. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-21tcg: Always define all of the TCGOpcode enum members.Richard Henderson1-33/+35
By always defining these symbols, we can eliminate a lot of ifdefs. To allow this to be checked reliably, the semantics of the TCG_TARGET_HAS_* macros must be changed from def/undef to true/false. This allows even more ifdefs to be removed, converting them into C if statements. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-10tcg-i386: Merge 64-bit generation.Richard Henderson1-3/+58
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-26tcg: Allow target-specific implementation of NOR.Richard Henderson1-0/+1
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-26tcg: Allow target-specific implementation of NAND.Richard Henderson1-0/+1
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-26tcg: Allow target-specific implementation of EQV.Richard Henderson1-0/+1
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-26remove remaining occurrences AREG[1-9] and TCG_AREG[1-9]Paolo Bonzini1-2/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-15 10:47:00 +0000