plugins: Add editor modelines; Adjust whitespace as needed.

Change-Id: I36124f6021d46a228721bdc976f6b9fef1c8c088
Reviewed-on: https://code.wireshark.org/review/4488
Reviewed-by: Bill Meier <wmeier@newsguy.com>

1 files changed, 43 insertions, 30 deletions

diff --git a/plugins/wimax/wimax_utils.c b/plugins/wimax/wimax_utils.c
index 51f0ab15d5..20e0a36870 100644
--- a/plugins/wimax/wimax_utils.c
+++ b/plugins/wimax/wimax_utils.c
@@ -187,16 +187,16 @@ static const value_string vals_harq[] =
 
 static const value_string vals_cs_specification[] =
 {
-	{0, "Reserved"},
-	{1, "Packet, IPv4"},
-	{2, "Packet, IPv6"},
-	{3, "Packet, IEEE 802.3/Ethernet"},
-	{4, "Packet, IEEE 802.1Q VLAN"},
-	{5, "Packet, IPv4 over IEEE 802.3/Ethernet"},
-	{6, "Packet, IPv6 over IEEE 802.3/Ethernet"},
-	{7, "Packet, IPv4 over IEEE 802.1Q VLAN"},
-	{8, "Packet, IPv6 over IEEE 802.1Q VLAN"},
-	{9, "ATM"},
+	{ 0, "Reserved"},
+	{ 1, "Packet, IPv4"},
+	{ 2, "Packet, IPv6"},
+	{ 3, "Packet, IEEE 802.3/Ethernet"},
+	{ 4, "Packet, IEEE 802.1Q VLAN"},
+	{ 5, "Packet, IPv4 over IEEE 802.3/Ethernet"},
+	{ 6, "Packet, IPv6 over IEEE 802.3/Ethernet"},
+	{ 7, "Packet, IPv4 over IEEE 802.1Q VLAN"},
+	{ 8, "Packet, IPv6 over IEEE 802.1Q VLAN"},
+	{ 9, "ATM"},
 	{10, "Packet, IEEE 802.3/Ethernet with ROCH header compression"},
 	{11, "Packet, IEEE 802.3/Ethernet with ECRTP header compression"},
 	{12, "Packet, IP2 with ROCH header compression"},
@@ -262,16 +262,16 @@ static const value_string vals_atm_switching_encodings[] =
 
 static const value_string vals_cc[] =
 {
-	{0, "OK/success"},
-	{1, "Reject-other"},
-	{2, "Reject-unrecognized-configuration-setting"},
-	{3, "Reject-temporary / reject-resource"},
-	{4, "Reject-permanent / reject-admin"},
-	{5, "Reject-not-owner"},
-	{6, "Reject-service-flow-not-found"},
-	{7, "Reject-service-flow-exists"},
-	{8, "Reject-required-parameter-not-present"},
-	{9, "Reject-header-suppression"},
+	{ 0, "OK/success"},
+	{ 1, "Reject-other"},
+	{ 2, "Reject-unrecognized-configuration-setting"},
+	{ 3, "Reject-temporary / reject-resource"},
+	{ 4, "Reject-permanent / reject-admin"},
+	{ 5, "Reject-not-owner"},
+	{ 6, "Reject-service-flow-not-found"},
+	{ 7, "Reject-service-flow-exists"},
+	{ 8, "Reject-required-parameter-not-present"},
+	{ 9, "Reject-header-suppression"},
 	{10, "Reject-unknown-transaction-id"},
 	{11, "Reject-authentication-failure"},
 	{12, "Reject-add-aborted"},
@@ -292,8 +292,8 @@ static const value_string vals_classification_action_rule[] =
 
 static const true_false_string tfs_supported =
 {
-    "supported",
-    "not supported"
+	"supported",
+	"not supported"
 };
 
 #if 0
@@ -392,13 +392,13 @@ static const value_string vals_tek_encryption_ids[] =
 
 static const value_string vals_dcd_mac_version[] =
 {
-    {1, "Conformance with IEEE Std 802.16-2001"},
-    {2, "Conformance with IEEE Std 802.16c-2002 and its predecessors"},
-    {3, "Conformance with IEEE Std 802.16a-2003 and its predecessors"},
-    {4, "Conformance with IEEE Std 802.16-2004"},
-    {5, "Conformance with IEEE Std 802.16-2004 and IEEE Std 802.16e-2005"},
-    {6, "reserved"},
-    {0, NULL}
+	{1, "Conformance with IEEE Std 802.16-2001"},
+	{2, "Conformance with IEEE Std 802.16c-2002 and its predecessors"},
+	{3, "Conformance with IEEE Std 802.16a-2003 and its predecessors"},
+	{4, "Conformance with IEEE Std 802.16-2004"},
+	{5, "Conformance with IEEE Std 802.16-2004 and IEEE Std 802.16e-2005"},
+	{6, "reserved"},
+	{0, NULL}
 };
 
 /* fix fields */
@@ -2424,7 +2424,7 @@ void wimax_service_flow_encodings_decoder(tvbuff_t *tvb, packet_info *pinfo, pro
 			break;
 		}	/* end of switch */
 		offset += tlv_len;
-        }	/* end of while loop */
+	}	/* end of while loop */
 }
 
 /**************************************************************/
@@ -3381,3 +3381,16 @@ guint wimax_common_tlv_encoding_decoder(tvbuff_t *tvb, packet_info *pinfo, proto
 	}	/* end of while loop */
 	return offset;
 }
+
+/*
+ * Editor modelines  -  http://www.wireshark.org/tools/modelines.html
+ *
+ * Local variables:
+ * c-basic-offset: 8
+ * tab-width: 8
+ * indent-tabs-mode: t
+ * End:
+ *
+ * vi: set shiftwidth=8 tabstop=8 noexpandtab:
+ * :indentSize=8:tabSize=8:noTabs=false:
+ */