summaryrefslogtreecommitdiff
path: root/wiretap/i4btrace.c
AgeCommit message (Collapse)AuthorFilesLines
2017-06-05Allow bigger snapshot lengths for D-Bus captures.Guy Harris1-2/+2
Use WTAP_MAX_PACKET_SIZE_STANDARD, set to 256KB, for everything except for D-Bus captures. Use WTAP_MAX_PACKET_SIZE_DBUS, set to 128MB, for them, because that's the largest possible D-Bus message size. See https://bugs.freedesktop.org/show_bug.cgi?id=100220 for an example of the problems caused by limiting the snapshot length to 256KB for D-Bus. Have a snapshot length of 0 in a capture_file structure mean "there is no snapshot length for the file"; we don't need the has_snap field in that case, a value of 0 mean "no, we don't have a snapshot length". In dumpcap, start out with a pipe buffer size of 2KB, and grow it as necessary. When checking for a too-big packet from a pipe, check against the appropriate maximum - 128MB for DLT_DBUS, 256KB for everything else. Change-Id: Ib2ce7a0cf37b971fbc0318024fd011e18add8b20 Reviewed-on: https://code.wireshark.org/review/21952 Petri-Dish: Guy Harris <guy@alum.mit.edu> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Guy Harris <guy@alum.mit.edu>
2015-01-03Remove unnecessary includes from wiretap folderMartin Mathieson1-1/+0
Change-Id: I10d3057801673bc1c8ea78f144215869cc4b1851 Reviewed-on: https://code.wireshark.org/review/6217 Petri-Dish: Martin Mathieson <martin.r.mathieson@googlemail.com> Reviewed-by: Martin Mathieson <martin.r.mathieson@googlemail.com>
2015-01-02Add "Editor modelines"; Adjust whitespace as needed.Bill Meier1-0/+13
Change-Id: Ic5a5acb0f36d3aa144edbfb1ae71097b18426db4 Reviewed-on: https://code.wireshark.org/review/6216 Reviewed-by: Bill Meier <wmeier@newsguy.com>
2014-10-09Use an enum for the open-routine return value, as per Evan Huus's suggestion.Guy Harris1-6/+6
Clean up some things we ran across while making those changes. Change-Id: Ic0d8943d36e6e120d7af0a6148fad98015d1e83e Reviewed-on: https://code.wireshark.org/review/4581 Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-10-07No need for WTAP_ERR_CANT_READ.Guy Harris1-2/+0
Unlike the standard I/O routines, the code we introduced that supports fast random seeking on gzipped files will always supply some specific error code for read errors, so we don't need WTAP_ERR_CANT_READ. Add WTAP_ERR_CANT_WRITE for writing, as we're still using the standard I/O routines for that. Set errno to WTAP_ERR_CANT_WRITE before calling fwrite() in wtap_dump_file_write(), so that it's used if fwrite() fails without setting errno. Change-Id: I6bf066a6838284a532737aa65fd0c9bb3639ad63 Reviewed-on: https://code.wireshark.org/review/4540 Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-10-07Add some higher-level file-read APIs and use them.Guy Harris1-14/+3
Add wtap_read_bytes(), which takes a FILE_T, a pointer, a byte count, an error number pointer, and an error string pointer as arguments, and that treats a short read of any sort, including a read that returns 0 bytes, as a WTAP_ERR_SHORT_READ error, and that returns the error number and string through its last two arguments. Add wtap_read_bytes_or_eof(), which is similar, but that treats a read that returns 0 bytes as an EOF, supplying an error number of 0 as an EOF indication. Use those in file readers; that simplifies the code and makes it less likely that somebody will fail to supply the error number and error string on a file read error. Change-Id: Ia5dba2a6f81151e87b614461349d611cffc16210 Reviewed-on: https://code.wireshark.org/review/4512 Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-09-28Make the time stamp resolution per-packet.Guy Harris1-1/+1
Pcap-ng files don't have a per-file time stamp resolution, they have a per-interface time stamp resolution. Add new time stamp resolution types of "unknown" and "per-packet", add the time stamp resolution to struct wtap_pkthdr, have the libwiretap core initialize it to the per-file time stamp resolution, and have pcap-ng do the same thing with the resolution that it does with the packet encapsulation. Get rid of the TS_PREC_AUTO_XXX values; just have TS_PREC_AUTO, which means "use the packet's resolution to determine how many significant digits to display". Rename all the WTAP_FILE_TSPREC_XXX values to WTAP_TSPREC_XXX, as they're also used for per-packet values. Change-Id: If9fd8f799b19836a5104aaa0870a951498886c69 Reviewed-on: https://code.wireshark.org/review/4349 Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-07-15Only one buffer.c, please.Guy Harris1-1/+1
Otherwise, if you link with both libwiretap and libfiletap, it's anybody's guess which one you get. That means you're wasting memory with two copies of its routines if they're identical, and means surprising behavior if they're not (which showed up when I was debugging a double-free crash - fixing libwiretap's buffer_free() didn't fix the problem, because Wireshark happened to be calling libfiletap' unfixed buffer_free()). There's nothing *tap-specific about Buffers, anyway, so it really belongs in wsutil. Change-Id: I91537e46917e91277981f8f3365a2c0873152870 Reviewed-on: https://code.wireshark.org/review/3066 Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-06-16Explicitly declare/cast 'unsigned <variable>' as 'unsigned int <variable>'AndersBroman1-3/+3
Applying part of Bug 7825 Change-Id: I460b5c61b04d793ccc27c25debbd5e8f08bc6974 Reviewed-on: https://code.wireshark.org/review/2280 Reviewed-by: Anders Broman <a.broman58@gmail.com>
2014-05-24Allow wtap_read() and wtap_seek_read() to return records other than packets.Guy Harris1-0/+1
Add a "record type" field to "struct wtap_pkthdr"; currently, it can be REC_TYPE_PACKET, for a record containing a packet, or REC_TYPE_FILE_TYPE_SPECIFIC, for records containing file-type-specific data. Modify code that reads packets to be able to handle non-packet records, even if that just means ignoring them. Rename some routines to indicate that they handle more than just packets. We don't yet have any libwiretap code that supplies records other than REC_TYPE_PACKET or that supporting writing records other than REC_TYPE_PACKET, or any code to support plugins for handling REC_TYPE_FILE_TYPE_SPECIFIC records; this is just the first step for bug 8590. Change-Id: Idb40b78f17c2c3aea72031bcd252abf9bc11c813 Reviewed-on: https://code.wireshark.org/review/1773 Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-05-23Fix the type of i4b_read_rec() to reflect what it actually returns.Guy Harris1-1/+1
Change-Id: Iafd4996a724418460043abda455a237a539c7925 Reviewed-on: https://code.wireshark.org/review/1750 Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-05-23Revert "Allow wtap_read() and wtap_seek_read() to return non-packet records."Guy Harris1-13/+11
This reverts commit c0c480d08c175eed4524ea9e73ec86298f468cf4. A better way to do this is to have the record type be part of struct wtap_pkthdr; that keeps the metadata for the record together and requires fewer API changes. That is in-progress. Change-Id: Ic558f163a48e2c6d0df7f55e81a35a5e24b53bc6 Reviewed-on: https://code.wireshark.org/review/1741 Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-05-23Allow wtap_read() and wtap_seek_read() to return non-packet records.Guy Harris1-11/+13
This is the first step towards implementing the mechanisms requestd in bug 8590; currently, we don't return any records other than packet records from libwiretap, and just ignore non-packet records in the rest of Wireshark, but this at least gets the ball rolling. Change-Id: I34a45b54dd361f69fdad1a758d8ca4f42d67d574 Reviewed-on: https://code.wireshark.org/review/1736 Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-05-09Revert "Refactor Wiretap"Guy Harris1-26/+23
This reverts commit 1abeb277f5e6bd27fbaebfecc8184e37ba9d008a. This isn't building, and looks as if it requires significant work to fix. Change-Id: I622b1bb243e353e874883a302ab419532b7601f2 Reviewed-on: https://code.wireshark.org/review/1568 Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-05-09Refactor WiretapMichael Mann1-23/+26
Start of refactoring Wiretap and breaking structures down into "generally useful fields for dissection" and "capture specific". Since this in intended as a "base" for Wiretap and Filetap, the "wft" prefix is used for "common" functionality. The "architectural" changes can be found in cfile.h, wtap.h, wtap-int.h and (new file) wftap-int.h. Most of the other (painstaking) changes were really just the result of compiling those new architecture changes. bug:9607 Change-Id: Ife858a61760d7a8a03be073546c0e7e582cab2ae Reviewed-on: https://code.wireshark.org/review/1485 Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-03-04Remove all $Id$ from top of fileAlexis La Goutte1-2/+0
(Using sed : sed -i '/^ \* \$Id\$/,+1 d') Fix manually some typo (in export_object_dicom.c and crc16-plain.c) Change-Id: I4c1ae68d1c4afeace8cb195b53c715cf9e1227a8 Reviewed-on: https://code.wireshark.org/review/497 Reviewed-by: Anders Broman <a.broman58@gmail.com>
2014-01-02No seek-read routines use the length argument, so eliminate it fromGuy Harris1-3/+2
wtap_seek_read(). svn path=/trunk/; revision=54570
2013-11-29Replace macros: BSWAP16, BSWAP32, BSWAP64 with glib-version.Jakub Zawadzki1-13/+13
XXX, people are not aware that expression of this macros might be evaluated multiple times, like: - BSWAP16(tvb_get_letohs(tvb, off)) : \ + GUINT16_SWAP_LE_BE(tvb_get_letohs(tvb, off)) : \ Should be tvb_get_ntohs() called? svn path=/trunk/; revision=53653
2013-11-08The "file types" we have are actually combinations of types andGuy Harris1-1/+1
subtypes, e.g. Network Monitor version 1 and Network Monitor version 2 are separate "file types", even though they both come from Network Monitor. Rename various functions, #defines, and variables appropriately. svn path=/trunk/; revision=53166
2013-06-17Merge "read record header" and "read packet data" routines into a singleGuy Harris1-36/+16
routine, used both by read and seek-read routines. svn path=/trunk/; revision=49988
2013-06-16Have the seek-read routines take a Buffer rather than a guint8 pointerGuy Harris1-29/+6
as the "where to put the packet data" argument. This lets more of the libwiretap code be common between the read and seek-read code paths, and also allows for more flexibility in the "fill in the data" path - we can expand the buffer as needed in both cases. svn path=/trunk/; revision=49949
2013-05-17Pull the record header processing code into i4b_read_rec_header(),Guy Harris1-112/+86
renaming it to i4b_process_rec_header(), so that it's used in the read and the seek-read routines. svn path=/trunk/; revision=49367
2013-03-19From beroset:Anders Broman1-1/+1
remove C++ incompatibilities https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=8416 svn path=/trunk/; revision=48424
2012-12-27Do not call wtap_file_read_unknown_bytes() orGuy Harris1-1/+1
wtap_file_read_expected_bytes() from an open routine - open routines are supposed to return -1 on error, 0 if the file doesn't appear to be a file of the specified type, or 1 if the file does appear to be a file of the specified type, but those macros will cause the caller to return FALSE on errors (so that, even if there's an I/O error, it reports "the file isn't a file of the specified type" rather than "we got an error trying to read the file"). When doing reads in an open routine before we've concluded that the file is probably of the right type, return 0, rather than -1, if we get WTAP_ERR_SHORT_READ - if we don't have enough data to check whether a file is of a given type, we should keep trying other types, not give up. For reads done *after* we've concluded the file is probably of the right type, if a read doesn't return the number of bytes we asked for, but returns an error of 0, return WTAP_ERR_SHORT_READ - the file is apparently cut short. For NetMon and NetXRay/Windows Sniffer files, use a #define for the magic number size, and use that for both magic numbers. svn path=/trunk/; revision=46803
2012-10-16Add wtap_pseudo_header union to wtap_pkthdr structure.Jakub Zawadzki1-3/+4
Use pkthdr instead of pseudo_header as argument for dissecting. svn path=/trunk/; revision=45601
2012-09-20We always HAVE_CONFIG_H so don't bother checking whether we have it or not.Jeff Morriss1-2/+0
svn path=/trunk/; revision=45015
2012-06-28Update Free Software Foundation address.Jakub Zawadzki1-1/+1
(COPYING will be updated in next commit) svn path=/trunk/; revision=43536
2012-05-04file_seek() used to be a wrapper around fseek() or gzseek(), both ofGuy Harris1-4/+1
which could use lseek() and were thus expensive due to system call overhead. To avoid making a system call for every packet on a sequential read, we maintained a data_offset field in the wtap structure for sequential reads. It's now a routine that just returns information from the FILE_T data structure, so it's cheap. Use it, rather than maintaining the data_offset field. Readers for some file formats need to maintain file offset themselves; have them do so in their private data structures. svn path=/trunk/; revision=42423
2012-02-25Add a presence flag field to the packet information structure filled inGuy Harris1-0/+2
by Wiretap, to indicate whether certain fields in that structure actually have data in them. Use the "time stamp present" flag to omit showing time stamp information for packets (and "packets") that don't have time stamps; don't bother working very hard to "fake" a time stamp for data files. Use the "interface ID present" flag to omit the interface ID for packets that don't have an interface ID. We don't use the "captured length, separate from packet length, present" flag to omit the captured length; that flag might be present but equal to the packet length, and if you want to know if a packet was cut short by a snapshot length, comparing the values would be the way to do that. More work is needed to have wiretap/pcapng.c properly report the flags, e.g. reporting no time stamp being present for a Simple Packet Block. svn path=/trunk/; revision=41185
2011-12-13Rename WTAP_ERR_BAD_RECORD to WTAP_ERR_BAD_FILE; it really reports anyGuy Harris1-2/+2
form of corruption/bogosity in a file, including in a file header as well as in records in the file. Change the error message wtap_strerror() returns for it to reflect that. Use it for some file header problems for which it wasn't already being used - WTAP_ERR_UNSUPPORTED shouldn't be used for that, it should only be used for files that we have no reason to believe are invalid but that have a version number we don't know about or some other non-link-layer-encapsulation-type value we don't know about. svn path=/trunk/; revision=40175
2011-12-13Add missing check for a too-large packet, so we don't blow up trying toGuy Harris1-0/+10
allocate a huge buffer; fixes bug 6667. svn path=/trunk/; revision=40166
2011-09-01Use guint8 rather than guchar for raw octets and pointers to arrays ofGuy Harris1-4/+4
same. Add to wiretap/pcap-common.c a routine to fill in the pseudo-header for ATM (by looking at the VPI, VCI, and packet data, and guessing) and Ethernet (setting the FCS length appropriately). Use it for both pcap and pcap-ng files. svn path=/trunk/; revision=38840
2011-04-21Add a new WTAP_ERR_DECOMPRESS error, and use that for errors discoveredGuy Harris1-13/+15
by the gunzipping code. Have it also supply a err_info string, and report it. Have file_error() supply an err_info string. Put "the file" - or, for WTAP_ERR_DECOMPRESS, "the compressed file", to suggest a decompression error - into the rawshark and tshark errors, along the lines of what other programs print. Fix a case in the Netscaler code where we weren't fetching the error code on a read failure. svn path=/trunk/; revision=36748
2011-04-06From Jakub Zawadzki:Guy Harris1-3/+3
file_read(buf, bsize, count, file) macro is compilant with fread function and takes elements count+ size of each element, however to make it compilant with gzread() it always returns number of bytes. In wiretap file_read() this is not really used, file_read is called either with bsize set to 1 or count to 1. Attached patch remove bsize argument from macro. svn path=/trunk/; revision=36491
2010-02-26Move the definitions of all the private data structures out ofGuy Harris1-11/+11
wtap-int.h, and change the unions of pointers to those private data structures into just void *'s. Have the generic wtap close routine free up the private data, rather than the type-specific close routine, just as the wtap_dumper close routine does for its private data. Get rid of close routines that don't do anything any more. svn path=/trunk/; revision=32015
2009-03-07More P64 changes.Guy Harris1-2/+2
svn path=/trunk/; revision=27641
2008-07-08Tighten heuristics a bit: traces with packets longer than 16k are no good ↵Jeff Morriss1-3/+3
(is this a valid limit?) svn path=/trunk/; revision=25679
2006-11-05change all file offsets from long to gint64 so we can - theoretically - ↵Ulf Lamping1-4/+4
handle files > 2GB correct. Please distclean Win32 builds! svn path=/trunk/; revision=19814
2005-08-25timestamp display precision:Ulf Lamping1-0/+1
- automatic adjustment depending on file format - manual adjustment through menu items save the setting in the recent file svn path=/trunk/; revision=15534
2005-08-24EVERYTHING IN THE BUILDBOT IS GOING TO BE RED!!! Sorry! Ulf Lamping1-2/+2
I've done more than a day to change the timestamp resolution from microseconds to nanoseconds. As I really don't want to loose those changes, I'm going to check in the changes I've done so far. Hopefully someone else will give me a helping hand with the things left ... What's done: I've changed the timestamp resolution from usec to nsec in almost any place in the sources. I've changed parts of the implementation in nstime.s/.h and a lot of places elsewhere. As I don't understand the editcap source (well, I'm maybe just too tired right now), hopefully someone else might be able to fix this soon. Doing all those changes, we get native nanosecond timestamp resolution in Ethereal. After fixing all the remaining issues, I'll take a look how to display this in a convenient way... As I've also changed the wiretap timestamp resolution from usec to nsec we might want to change the wiretap version number... svn path=/trunk/; revision=15520
2005-08-03Don't assume ints are 32 bits. Fixes a recent Buildbot error.Gerald Combs1-4/+4
svn path=/trunk/; revision=15200
2005-08-02Include the .h files into the .c files. That way weJörg Mayer1-0/+1
a) get rid of warnings of type "no previous declaration" and b) make sure that declaration and implementation are in sync. svn path=/trunk/; revision=15168
2004-07-18Set the svn:eol-style property on all text files to "native", so thatGuy Harris1-1/+1
they have LF at the end of the line on UN*X and CR/LF on Windows; hopefully this means that if a CR/LF version is checked in on Windows, the CRs will be stripped so that they show up only when checked out on Windows, not on UN*X. svn path=/trunk/; revision=11400
2004-01-26Fix a compiler warning.Guy Harris1-3/+3
svn path=/trunk/; revision=9867
2004-01-25Have the Wiretap open, read, and seek-and-read routines return, inGuy Harris1-8/+12
addition to an error code, an error info string, for WTAP_ERR_UNSUPPORTED, WTAP_ERR_UNSUPPORTED_ENCAP, and WTAP_ERR_BAD_RECORD errors. Replace the error messages logged with "g_message()" for those errors with g_strdup()ed or g_strdup_printf()ed strings returned as the error info string, and change the callers of those routines to, for those errors, put the info string into the printed message or alert box for the error. Add messages for cases where those errors were returned without printing an additional message. Nobody uses the error code from "cf_read()" - "cf_read()" puts up the alert box itself for failures; get rid of the error code, so it just returns a success/failure indication. Rename "file_read_error_message()" to "cf_read_error_message()", as it handles read errors from Wiretap, and have it take an error info string as an argument. (That handles a lot of the work of putting the info string into the error message.) Make some variables in "ascend-grammar.y" static. Check the return value of "erf_read_header()" in "erf_seek_read()". Get rid of an unused #define in "i4btrace.c". svn path=/trunk/; revision=9852
2002-10-31Discard the WTAP_ENCAP_LAPD encapsulation type in favor of aGuy Harris1-67/+18
WTAP_ENCAP_ISDN encapsulation type, which includes a pseudo-header giving the direction (user-to-network or network-to-user) and the channel number. Add a new circuit type, using the ISDN channel number as the circuit ID. Add an ISDN dissector to put the direction and channel number into the protocol tree and to call the appropriate dissector for the payload based on the channel (LAPD for the D channel; V.120, PPP, or data for B channels, based on some heuristics). svn path=/trunk/; revision=6521
2002-07-29From Joerg Mayer:Guy Harris1-5/+5
All files: - Replace types from sys/types.h by those from glib.h - Replace ntoh family of macros from netinet/in.h and winsock2.h by g_ntoh family from glib.h - Remove now unneeded includes of sys/types.h, netinet/in.h and winsock2.h wtap.h Move includes to the top svn path=/trunk/; revision=5909
2002-06-07Graeme Hewson noted that zlib has a bug wherein "gzseek()" doesn't setGuy Harris1-7/+3
the internal z_err value for the stream if an "fseek()" call it makes fails, so that if "gzerror()" is subsequently called, it returns Z_OK rather than an error. To work around this, we pass "file_seek()" an "int *err", and have the with-zlib version of "file_seek()" check, if "gzseek()" fails, whether the return value of "file_error()" is 0 and, if so, have it return "errno" instead. svn path=/trunk/; revision=5642
2002-04-09Move the definition of the FROM_DCE bit in the "flags" field of aGuy Harris1-2/+2
"struct x25_phdr" to "wiretap/wtap.h". Have two X.25 dissectors, one of which assumes that there's a "struct x25_phdr" pseudo-header and one of which doesn't; the former uses the information in that pseudo-header to determine whether the packet is DTE->DCE or DCE->DTE, and the latter assumes it has no clue whether the packet is DTE->DCE or DCE->TDE. Use the former one in the LAPB dissector, and the latter one in the XOT dissector and in the LLC dissector table. In the X.25-over-TCP dissector, handle multiple X.25 packets per TCP segment, and handle X.25 packets split across TCP segments. svn path=/trunk/; revision=5134
2002-03-05Make "wtap_seek_read()" return TRUE on success and FALSE on error, likeGuy Harris1-10/+10
"wtap_read()". Add some additional error checks to the Sniffer file reader. svn path=/trunk/; revision=4875
generated by cgit v1.2.1 (git 2.18.0) at 2024-05-17 09:55:01 +0000