summaryrefslogtreecommitdiff
path: root/target/mips/translate.c
AgeCommit message (Collapse)AuthorFilesLines
2018-05-09target/mips: convert to TranslatorOpsEmilio G. Cota1-114/+113
Notes: - DISAS_TOO_MANY replaces the former "break" in the translation loop. However, care must be taken not to overwrite a previous condition in is_jmp; that's why in translate_insn we first check is_jmp and return if it's != DISAS_NEXT. - Added an assert in translate_insn, before exiting due to an exception, to make sure that is_jmp is set to DISAS_NORETURN (the exception generation function always sets it.) - Added an assert for the default case in is_jmp's switch. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-09target/mips: use *ctx for DisasContextEmilio G. Cota1-82/+83
No changes to the logic here; this is just to make the diff that follows easier to read. While at it, remove the unnecessary 'struct' in 'struct TranslationBlock'. Note that checkpatch complains with a false positive: ERROR: space prohibited after that '&' (ctx:WxW) #75: FILE: target/mips/translate.c:20220: + ctx->kscrexist = (env->CP0_Config4 >> CP0C4_KScrExist) & 0xff; ^ Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-09target/mips: convert to DisasContextBaseEmilio G. Cota1-171/+175
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-09target/mips: convert to DisasJumpTypeEmilio G. Cota1-95/+91
Notes: - BS_EXCP in generate_exception_err and after hen_helper_wait becomes DISAS_NORETURN, because we do not return after raising an exception. - Some uses of BS_EXCP are misleading in that they're used only as a "not BS_STOP" exit condition, i.e. they have nothing to do with an actual exception. For those cases, define and use DISAS_EXIT, which is clearer. With this and the above change, BS_EXCP goes away completely. - fix a comment typo (s/intetrupt/interrupt/). Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-09target/mips: use lookup_and_goto_ptr on BS_STOPEmilio G. Cota1-1/+2
The TB after BS_STOP is not fixed (e.g. helper_mtc0_hwrena changes hflags, which ends up changing the TB flags via cpu_get_tb_cpu_state). This requires a full lookup (i.e. with flags) via lookup_and_goto_ptr instead of gen_goto_tb, since the latter only looks at the PC for in-page goto's. Fix it. Reported-by: Richard Henderson <richard.henderson@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-09target/mips: avoid integer overflow in next_page PC checkEmilio G. Cota1-3/+3
If the PC is in the last page of the address space, next_page_start overflows to 0. Fix it. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-12-29tcg: Remove TCGV_UNUSED* and TCGV_IS_UNUSED*Richard Henderson1-1/+1
These are now trivial sets and tests against NULL. Unwrap. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-30Merge remote-tracking branch ↵Peter Maydell1-14/+6
'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging x86/cpu/numa queue, 2017-10-27 # gpg: Signature made Fri 27 Oct 2017 15:17:12 BST # gpg: using RSA key 0x2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/x86-and-machine-pull-request: (39 commits) x86: Skip check apic_id_limit for Xen numa: fixup parsed NumaNodeOptions earlier mips: r4k: replace cpu_model with cpu_type mips: mipssim: replace cpu_model with cpu_type mips: Magnum/Acer Pica 61: replace cpu_model with cpu_type mips: fulong2e: replace cpu_model with cpu_type mips: malta/boston: replace cpu_model with cpu_type mips: use object_new() instead of gnew()+object_initialize() sparc: leon3: use generic cpu_model parsing sparc: sparc: use generic cpu_model parsing sparc: sun4u/sun4v/niagara: use generic cpu_model parsing sparc: cleanup cpu type name composition tricore: use generic cpu_model parsing tricore: cleanup cpu type name composition unicore32: use generic cpu_model parsing unicore32: cleanup cpu type name composition xtensa: lx60/lx200/ml605/kc705: use generic cpu_model parsing xtensa: sim: use generic cpu_model parsing xtensa: cleanup cpu type name composition sh4: remove SuperHCPUClass::name field ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-27mips: malta/boston: replace cpu_model with cpu_typeIgor Mammedov1-14/+6
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1507211474-188400-37-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-10-27Merge remote-tracking branch 'remotes/rth/tags/pull-dis-20171026' into stagingPeter Maydell1-1/+1
Capstone disassembler # gpg: Signature made Thu 26 Oct 2017 10:57:27 BST # gpg: using RSA key 0x64DF38E8AF7E215F # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-dis-20171026: disas: Add capstone as submodule disas: Remove monitor_disas_is_physical ppc: Support Capstone in disas_set_info arm: Support Capstone in disas_set_info i386: Support Capstone in disas_set_info disas: Support the Capstone disassembler library disas: Remove unused flags arguments target/arm: Don't set INSN_ARM_BE32 for CONFIG_USER_ONLY target/arm: Move BE32 disassembler fixup target/ppc: Convert to disas_set_info hook target/i386: Convert to disas_set_info hook Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # target/i386/cpu.c # target/ppc/translate_init.c
2017-10-25disas: Remove unused flags argumentsRichard Henderson1-1/+1
Now that every target is using the disas_set_info hook, the flags argument is unused. Remove it. Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24tcg: Initialize cpu_env genericallyRichard Henderson1-4/+0
This is identical for each target. So, move the initialization to common code. Move the variable itself out of tcg_ctx and name it cpu_env to minimize changes within targets. This also means we can remove tcg_global_reg_new_{ptr,i32,i64}, since there are no longer global-register temps created by targets. Reviewed-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24tcg: define tcg_init_ctx and make tcg_ctx a pointerEmilio G. Cota1-1/+1
Groundwork for supporting multiple TCG contexts. The core of this patch is this change to tcg/tcg.h: > -extern TCGContext tcg_ctx; > +extern TCGContext tcg_init_ctx; > +extern TCGContext *tcg_ctx; Note that for now we set *tcg_ctx to whatever TCGContext is passed to tcg_context_init -- in this case &tcg_init_ctx. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24tcg: convert tb->cflags reads to tb_cflags(tb)Emilio G. Cota1-13/+13
Convert all existing readers of tb->cflags to tb_cflags, so that we use atomic_read and therefore avoid undefined behaviour in C11. Note that the remaining setters/getters of the field are protected by tb_lock, and therefore do not need conversion. Luckily all readers access the field via 'tb->cflags' (so no foo.cflags, bar->cflags in the code base), which makes the conversion easily scriptable: FILES=$(git grep 'tb->cflags' target include/exec/gen-icount.h \ accel/tcg/translator.c | cut -f1 -d':' | sort | uniq) perl -pi -e 's/([^.>])tb->cflags/$1tb_cflags(tb)/g' $FILES perl -pi -e 's/([a-z->.]*)(->|\.)tb->cflags/tb_cflags($1$2tb)/g' $FILES Then manually fixed the few errors that checkpatch reported. Compile-tested for all targets. Suggested-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24qom: Introduce CPUClass.tcg_initializeRichard Henderson1-7/+0
Move target cpu tcg initialization to common code, called from cpu_exec_realizefn. Acked-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-10tcg: remove addr argument from lookup_tb_ptrEmilio G. Cota1-2/+2
It is unlikely that we will ever want to call this helper passing an argument other than the current PC. So just remove the argument, and use the pc we already get from cpu_get_tb_cpu_state. This change paves the way to having a common "tb_lookup" function. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-21mips: replace cpu_mips_init() with cpu_generic_init()Igor Mammedov1-17/+0
now cpu_mips_init() reimplements subset of cpu_generic_init() tasks, so just drop it and use cpu_generic_init() directly. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [PMD: use internal.h instead of cpu.h] Tested-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-09-21mips: MIPSCPU model subclassesIgor Mammedov1-7/+6
Register separate QOM types for each mips cpu model, so it would be possible to reuse generic CPU creation routines. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [PMD: use internal.h, use void* to hold cpu_def in MIPSCPUClass, mark MIPSCPU abstract, address Eduardo Habkost review] Tested-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-09-21mips: call cpu_mips_realize_env() from mips_cpu_realizefn()Philippe Mathieu-Daudé1-1/+0
This changes the order between cpu_mips_realize_env() and cpu_exec_initfn(), but cpu_exec_initfn() don't have anything that depends on cpu_mips_realize_env() being called first. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Igor Mammedov <imammedo@redhat.com> Tested-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-09-21mips: split cpu_mips_realize_env() out of cpu_mips_init()Philippe Mathieu-Daudé1-7/+12
so it can be used in mips_cpu_realizefn() in the next commit Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Igor Mammedov <imammedo@redhat.com> Tested-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-09-21mips: introduce internal.h and cleanup cpu.hPhilippe Mathieu-Daudé1-0/+1
no logical change, only code movement (and fix a comment typo). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Igor Mammedov <imammedo@redhat.com> Tested-by: James Hogan <james.hogan@imgtec.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-08-02target/mips: Fix RDHWR CC with icountJames Hogan1-0/+11
RDHWR CC reads the CPU timer like MFC0 CP0_Count, so with icount enabled it must set can_do_io while it calls the helper to avoid the "Bad icount read" error. It should also break out of the translation loop to ensure that timer interrupts are immediately handled. Fixes: 2e70f6efa8b9 ("Add instruction counter.") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-08-02target/mips: Drop redundant gen_io_start/stop()James Hogan1-8/+0
DMTC0 CP0_Cause does a redundant gen_io_start() and gen_io_end() pair, even though this is done for all DMTC0 operations outside of the switch statement. Remove these redundant calls. Fixes: 5dc5d9f055c5 ("mips: more fixes to the MIPS interrupt glue logic") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-08-02target/mips: Use BS_EXCP where interrupts are expectedJames Hogan1-13/+34
Commit e350d8ca3ac7 ("target/mips: optimize indirect branches") made indirect branches able to directly find the next TB and jump straight to it without breaking out of translated code and going around the main execution loop. This breaks the assumption in target/mips/translate.c that BS_STOP is sufficient to cause pending interrupts to be handled, since interrupts are only checked in the main loop. Fix a few of these assumptions by using gen_save_pc to update the saved PC and using BS_EXCP instead of BS_STOP: - [D]MFC0 CP0_Count may trigger a timer interrupt which should be immediately handled. - [D]MTC0 CP0_Cause may trigger an interrupt (but in fact translation was only even being stopped in the DMTC0 case). - [D]MTC0 CP0_<any> when icount is used is assumed could potentially cause interrupts. - EI may trigger an interrupt which was pending. I specifically hit this case when running KVM nested in mipsel-softmmu. A timer interrupt while the 2nd guest was executing is caught by KVM which switches back to the normal Linux exception base and re-enables interrupts with EI. Since the above commit QEMU doesn't leave translated code until the nested KVM has already restored the KVM exception base and returned to the 2nd guest, at which point it is too late to check for pending interrupts and it gets stuck in an infinite loop of unhandled interrupts. Something similar was needed for ARM in commit b29fd33db578 ("target/arm: use DISAS_EXIT for eret handling"). Fixes: e350d8ca3ac7 ("target/mips: optimize indirect branches") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Richard Henderson <rth@twiddle.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-08-02mips: Add KVM T&E segment support for TCGJames Hogan1-2/+2
MIPS KVM trap & emulate guest kernels have a different segment layout compared with traditional MIPS kernels, to allow both the user and kernel code to run from the user address segment without repeatedly trapping to KVM. QEMU currently supports this layout only for KVM, but its sometimes useful to be able to run these kernels in QEMU on a PC, so enable it for TCG too. This also paves the way for MIPS KVM VZ support (which uses the normal virtual memory layout) by abstracting whether user mode kernel segments are in use. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Reviewed-by: Richard Henderson <rth@twiddle.net> [Yongbok Kim: minor change] Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-08-02target-mips: Don't stop on [d]mtc0 DESAVE/KScratchJames Hogan1-4/+0
Writing to the MIPS DESAVE register (and now the KScratch registers) will stop translation, supposedly due to risk of execution mode switches. However these registers are basically RW scratch registers with no side effects so there is no risk of them triggering execution mode changes. Drop the bstate = BS_STOP for these registers for both mtc0 and dmtc0. Fixes: 7a387fffce50 ("Add MIPS32R2 instructions, and generally straighten out the instruction decoding. This is also the first percent towards MIPS64 support.") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20target/mips: Add segmentation control registersJames Hogan1-0/+88
The optional segmentation control registers CP0_SegCtl0, CP0_SegCtl1 & CP0_SegCtl2 control the behaviour and required privilege of the legacy virtual memory segments. Add them to the CP0 interface so they can be read and written when CP0_Config3.SC=1, and initialise them to describe the standard legacy layout so they can be used in future patches regardless of whether they are exposed to the guest. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20target/mips: Abstract mmu_idx from hflagsJames Hogan1-1/+1
The MIPS mmu_idx is sometimes calculated from hflags without an env pointer available as cpu_mmu_index() requires. Create a common hflags_mmu_index() for the purpose of this calculation which can operate on any hflags, not just with an env pointer, and update cpu_mmu_index() itself and gen_intermediate_code() to use it. Also update debug_post_eret() and helper_mtc0_status() to log the MMU mode with the status change (SM, UM, or nothing for kernel mode) based on cpu_mmu_index() rather than directly testing hflags. This will also allow the logic to be more easily updated when a new MMU mode is added. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20target/mips: Decode microMIPS EVA load & store instructionsJames Hogan1-4/+115
Implement decoding of microMIPS EVA load and store instruction groups in the POOL31C pool. These use the same gen_ld(), gen_st(), gen_st_cond() helpers as the MIPS32 decoding, passing the equivalent MIPS32 opcodes as opc. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20target/mips: Decode MIPS32 EVA load & store instructionsJames Hogan1-0/+106
Implement decoding of MIPS32 EVA loads and stores. These access the user address space from kernel mode when implemented, so for each instruction we need to check that EVA is available from Config5.EVA & check for sufficient COP0 privilege (with the new check_eva()), and then override the mem_idx used for the operation. Unfortunately some Loongson 2E instructions use overlapping encodings, so we must be careful not to prevent those from being decoded when EVA is absent. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20target/mips: Prepare loads/stores for EVAJames Hogan1-35/+42
EVA load and store instructions access the user mode address map, so they need to use mem_idx of MIPS_HFLAG_UM. Update the various utility functions to allow mem_idx to be more easily overridden from the decoding logic. Specifically we add a mem_idx argument to the op_ld/st_* helpers used for atomics, and a mem_idx local variable to gen_ld(), gen_st(), and gen_st_cond(). Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20target/mips: Add CP0_Ebase.WG (write gate) supportJames Hogan1-3/+5
Add support for the CP0_EBase.WG bit, which allows upper bits to be written (bits 31:30 on MIPS32, or bits 63:30 on MIPS64), along with the CP0_Config5.CV bit to control whether the exception vector for Cache Error exceptions is forced into KSeg1. This is necessary on MIPS32 to support Segmentation Control and Enhanced Virtual Addressing (EVA) extensions (where KSeg1 addresses may not represent an unmapped uncached segment). It is also useful on MIPS64 to allow the exception base to reside in XKPhys, and possibly out of range of KSEG0 and KSEG1. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> [yongbok.kim@imgtec.com: minor changes] Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20target/mips: Fix MIPS64 MFC0 UserLocal on BE hostJames Hogan1-2/+3
Using MFC0 to read CP0_UserLocal uses tcg_gen_ld32s_tl, however CP0_UserLocal is a target_ulong. On a big endian host with a MIPS64 target this reads and sign extends the more significant half of the 64-bit register. Fix this by using ld_tl to load the whole target_ulong and ext32s_tl to sign extend it, as done for various other target_ulong COP0 registers. Fixes: d279279e2b5c ("target-mips: implement UserLocal Register") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-19tcg: Pass generic CPUState to gen_intermediate_code()Lluís Vilanova1-3/+2
Needed to implement a target-agnostic gen_intermediate_code() in the future. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Alex Benneé <alex.benee@linaro.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-Id: <150002025498.22386.18051908483085660588.stgit@frigg.lan> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-07-17target/mips: optimize WSBH, DSBH and DSHDAurelien Jarno1-6/+12
Use the same mask to avoid having to load two different constants. Suggested-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2017-07-11target/mips: fix msa copy_[s|u]_df rd = 0 corner caseMiodrag Dinic1-2/+6
This patch fixes the msa copy_[s|u]_df instruction emulation when the destination register rd is zero. Without this patch the zero register would get clobbered, which should never happen because it is supposed to be hardwired to 0. Fix this corner case by explicitly checking rd = 0 and effectively making these instructions emulation no-op in that case. Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-06-05target/mips: optimize indirect branchesAurelien Jarno1-1/+1
Cc: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-Id: <20170430145254.25616-4-aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-05target/mips: optimize cross-page direct jumps in softmmuAurelien Jarno1-1/+1
Cc: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-Id: <20170430145254.25616-3-aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-03-20target/mips: fix delay slot detection in gen_msa_branch()Yongbok Kim1-1/+1
It is unnecessary to test R6 from delay/forbidden slot check in gen_msa_branch(). https://bugs.launchpad.net/qemu/+bug/1663287 Reported-by: Brian Campbell <bacam@z273.org.uk> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-03-20target-mips: replace few LOG_DISAS() with trace pointsPhilippe Mathieu-Daudé1-14/+11
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-03-20target-mips: replace break by goto cp0_unimplementedPhilippe Mathieu-Daudé1-44/+44
this fixes many warnings like: target/mips/translate.c:6253:13: warning: Value stored to 'rn' is never read rn = "invalid sel"; ^ ~~~~~~~~~~~~~ Reported-by: Clang Static Analyzer Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-03-20target-mips: log bad coprocessor0 register accesses with LOG_UNIMPPhilippe Mathieu-Daudé1-6/+6
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-03-20target-mips: remove old & unuseful commentsPhilippe Mathieu-Daudé1-4/+0
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-02-21target-mips: Provide function to test if a CPU supports an ISAPaul Burton1-0/+10
Provide a new cpu_supports_isa function which allows callers to determine whether a CPU supports one of the ISA_ flags, by testing whether the associated struct mips_def_t sets the ISA flags in its insn_flags field. An example use of this is to allow boards which generate bootloader code to determine the properties of the CPU that will be used, for example whether the CPU is 64 bit or which architecture revision it implements. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-01-10target-mips: Use clz opcodeRichard Henderson1-7/+16
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10target-mips: Use the new extract opRichard Henderson1-7/+5
Use extract for EXT and DEXT. Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-12-20Move target-* CPU file into a target/ folderThomas Huth1-0/+20423
We've currently got 18 architectures in QEMU, and thus 18 target-xxx folders in the root folder of the QEMU source tree. More architectures (e.g. RISC-V, AVR) are likely to be included soon, too, so the main folder of the QEMU sources slowly gets quite overcrowded with the target-xxx folders. To disburden the main folder a little bit, let's move the target-xxx folders into a dedicated target/ folder, so that target-xxx/ simply becomes target/xxx/ instead. Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part] Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part] Acked-by: Michael Walle <michael@walle.cc> [lm32 part] Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part] Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part] Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part] Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part] Acked-by: Richard Henderson <rth@twiddle.net> [alpha part] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part] Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part] Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [cris&microblaze part] Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part] Signed-off-by: Thomas Huth <thuth@redhat.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-05-18 11:00:14 +0000